Hop matter into carboy: flavor difference? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > General Techniques > Hop matter into carboy: flavor difference?

Reply
 
Thread Tools
Old 03-03-2012, 12:07 AM   #1
adc123
Recipes 
 
Jun 2010
Santa Barbara CA
Posts: 103
Liked 1 Times on 1 Posts



Back in November, I took a crack at a Pliny clone. Transferring the beer to the carboy brought alot of hop matter into the carboy (filter got stuck so I had to knock it a few times to loosen it up). After fermentation, I cooled and racked to a keg. In the keg I hit it with 3 oz a whole leaves in a carboy for almost two weeks.

The problem: the beer seemed just over-the-top grassy. I know most people say a week is the maximum time. Some say two weeks. I am guessing the issue wasn't the dry hopping, but perhaps the insane hop matter going into the carboy after the boiling, acting as "dry hops" almost?



 
Reply With Quote
Old 03-03-2012, 04:36 AM   #2
Nanobru
Recipes 
 
Aug 2008
Huntington Beach, California
Posts: 283
Liked 5 Times on 4 Posts


Could be, and it could be all your dry hops in the fermenter for two weeks. People say 2 weeks is the maximum with nornmal dry hopping rates. Pliny obviously has much more than normal dry hopping rates. To get around the vegetative taste, Vinnie would dry hop in two additions.


__________________
I do not subscribe to threads, so if you have a question pm me.

 
Reply With Quote
Old 03-03-2012, 04:39 AM   #3
Rubes
Recipes 
 
Nov 2011
, Ontario
Posts: 231
Liked 18 Times on 13 Posts


Basic Brewing posted a good podcast last week about trub in the fermenter, they did an experiment comparing the difference between trub and no trub. Check it out, pretty interesting results.

 
Reply With Quote
Old 03-05-2012, 04:14 PM   #4
Landshark67
Recipes 
 
Apr 2008
Posts: 121
Liked 3 Times on 3 Posts


IMO - 3oz of whole hops would certainly give your beer a much more grass/vegetation characteristic than if you had simply used 1oz of pellet hops. I like using whole hops (most are homegrown) at the end of the boil but get much better results using pellet hops for dry-hopping.

I've experimented with filtering the hops pre-fermentor and/or letting loads go into the conical. No real difference in flavor. This has become less of an issue recently since I've done more hop-busting (14oz in 5gal) and less dry hopping.

Disclaimer: I hate vegetal characteristics and dispise Simcoe as a dry hop.

Brew on!


The problem: the beer seemed just over-the-top grassy. I know most people say a week is the maximum time. Some say two weeks. I am guessing the issue wasn't the dry hopping, but perhaps the insane hop matter going into the carboy after the boiling, acting as "dry hops" almost?[/QUOTE]

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Off Flavor Advice (Pool flavor?) Mishkan General Techniques 12 06-17-2011 11:32 PM
does it matter how much water in wort roder_60 General Techniques 2 02-14-2008 03:18 PM
Will a day or two matter much? c.n.budz General Techniques 9 10-19-2007 03:48 PM
ring around the carboy - off flavor? pokey General Techniques 3 04-30-2006 12:44 PM


Forum Jump