Starting my HERMS build. - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Starting my HERMS build.

Thread Tools
Old 02-29-2012, 01:09 AM   #1
Nov 2009
Posts: 17

After years of drooling and looking at all the different setups out there, i finally nailed mine down and started building.
The stand is assembled, but unfinished.
The HLT was getting a dry fit before I sexy it up a little bit.
Just a basic control panel.
I am using the propane burner to bring the water for the HLT close to its initial temp and from there the electric heaters will take over (heated in the BK then pumped to the HLT). I decided to use 2 120v 2000w heaters because i already have 2 dedicated 20A GFCI circuits in my yard for my other hobby that went overboard (animated Christmas lights). I also have a timed relay for the second heat element so it only turns on if the first element runs for more then 3 mins. But that is adjustable from 3 seconds to 10 mins. I will be working like crazy the next few weeks to get it done and will post updates along the way.
Click image for larger version

Name:	photo a.jpg
Views:	138
Size:	91.5 KB
ID:	50206   Click image for larger version

Name:	photo (2)a.jpg
Views:	133
Size:	30.3 KB
ID:	50216   Click image for larger version

Name:	photo (4)a.jpg
Views:	147
Size:	33.5 KB
ID:	50217   Click image for larger version

Name:	photo (1)a.jpg
Views:	138
Size:	23.8 KB
ID:	50218  

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
My HERMS Build Gumbys_Brew Brew Stands 7 01-02-2014 05:17 PM
Starting Keg Conversions for a 3 Vessel E-Herms System Hoppopotomus Kettles, Mash Tuns & Hot Liquor Tanks 104 02-21-2013 07:10 PM
Another E-HERMS Build... joenads Brew Stands 34 10-07-2012 07:04 PM
Starting HERMS Build rj_hockey Brew Stands 4 02-02-2009 07:22 PM

Forum Jump