Priming in a keg - Page 4 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Priming in a keg

Reply
 
Thread Tools
Old 03-01-2012, 07:57 AM   #31
dinnerstick
Recipes 
 
Nov 2010
utrecht, netherlands
Posts: 2,023
Liked 267 Times on 196 Posts


just pull the pressure release valve for a split second after a day or two. you will know if it has sealed



 
Reply With Quote
Old 10-06-2012, 02:54 PM   #32
tamorgan
Recipes 
 
Sep 2012
Posts: 6

Quote:
Originally Posted by JuanMoore View Post
It builds enough pressure to verify a sealed keg within a day at the most. I've carbed ~8 kegs this way, and they all sealed fine, but I verified the seal after a day each time just to be sure. Now I have a second CO2 tank at my shop where I do my fermentation so I can seal the kegs with pressure when I prime to carb.
How do you go about verifying the keg has sealed this way?

 
Reply With Quote
Old 10-06-2012, 02:57 PM   #33
tamorgan
Recipes 
 
Sep 2012
Posts: 6

Ah, it should give the popped bottle noise, eh? Thanks

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Priming a keg Mjg1279 Bottling/Kegging 7 09-06-2011 06:49 PM
I am DONE using DME for priming. Never again! Tall_Yotie Bottling/Kegging 26 04-26-2011 08:24 PM
Priming with DME nirad Bottling/Kegging 2 02-01-2009 07:36 PM
Priming With DME ?? Mutilated1 Bottling/Kegging 5 09-08-2007 11:07 PM
LME Priming fsciuto2 Bottling/Kegging 1 08-16-2007 03:33 AM


Forum Jump