Keezer build - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Keezer build

Reply
 
Thread Tools
Old 02-25-2012, 02:02 PM   #1
KKreisler
Recipes 
 
Oct 2011
farmington, MN
Posts: 9


A few pics of the new keezer.
there is a Caribou slobber brown, and a sierra nevada clone carbonating right now, I am going to add a rootbeer or a cream soda to the mix for my sons (and myself) today hopefully.
Click image for larger version

Name:	P1010121 (Custom).JPG
Views:	1093
Size:	88.1 KB
ID:	49571   Click image for larger version

Name:	P1010130 (Custom).JPG
Views:	728
Size:	74.9 KB
ID:	49572   Click image for larger version

Name:	P1010137 (Custom).JPG
Views:	672
Size:	122.0 KB
ID:	49573   Click image for larger version

Name:	P1010143 (Custom).JPG
Views:	799
Size:	103.9 KB
ID:	49574  

 
Reply With Quote
Old 02-25-2012, 03:04 PM   #2
solo103
Recipes 
 
Aug 2011
jacksonville, florida
Posts: 226
Liked 1 Times on 1 Posts


How did you attach the wood collar?

 
Reply With Quote
Old 02-25-2012, 03:09 PM   #3
apparatus
HBT_LIFETIMESUPPORTER.png
 
apparatus's Avatar
Recipes 
 
Mar 2006
Salem, Oregon
Posts: 252
Liked 9 Times on 6 Posts


Very nice. Enjoy!
__________________
Apparatus

 
Reply With Quote
Old 02-25-2012, 03:22 PM   #4
KKreisler
Recipes 
 
Oct 2011
farmington, MN
Posts: 9

Quote:
Originally Posted by solo103 View Post
How did you attach the wood collar?
To avoid drilling into the rim of the chest freezer I ended up using scotch high density foam mounting tape. I believe the spec on the tape was around 2lb / sq inch.
I adhered the tape around the entire perimeter of the collar leaving the paper on the back side. I next set the lid on the freezer and removed the tape backing from one of the ends of the collar and carefully attached.
i then lifted the opposite about an inch, removed the rest of the backing and firmly placed the collar.
I am pretty pleased with the bond. I am a bit concerned about how it will hold up at lower temps, but if it fails there are automotive adhesive tapes that have a much stronger bond strength and even more temp resilience.

 
Reply With Quote
Old 02-25-2012, 05:28 PM   #5
bucfanmike
HBT_LIFETIMESUPPORTER.png
 
bucfanmike's Avatar
Recipes 
 
Apr 2010
Duluth
Posts: 1,023
Liked 27 Times on 24 Posts


Farmington MN, and ND Fighting Sioux decals? Go UMD Bulldogs. Just had to get that out of the way

Nice Build
__________________
Mike in Duluth

Currently on Tap
1. Hefeweizen
2. BM Centennial Blonde
3. LHMS Clone

Pipeline
Next on Tap-Denny Conn Rye IPA
Kegged and aging Ed Worts Apfelwine, Denny Conn BVIP
Fermenters -

 
Reply With Quote
Old 02-25-2012, 05:53 PM   #6
solo103
Recipes 
 
Aug 2011
jacksonville, florida
Posts: 226
Liked 1 Times on 1 Posts


If you didn't drill through the rim to attach the collar did you drill through it to attach the taps ? Just curious I want to build one soon and have seen them done a bunch of diffrent ways

 
Reply With Quote
Old 02-25-2012, 06:28 PM   #7
KKreisler
Recipes 
 
Oct 2011
farmington, MN
Posts: 9

Quote:
Originally Posted by bucfanmike View Post
Farmington MN, and ND Fighting Sioux decals? Go UMD Bulldogs. Just had to get that out of the way

Nice Build
School Pride, Props go out to the Bulldogs too, just not as enthusiastically




Solo,
I drilled through the collar to attach the taps, the only penetrations I have made in the actual freezer are the four screw around the stainless plate I mounted the temp controller and the LED to. The area behid that is the compressor cavity.
when I wired the auber temp controller I wired it so that the LED is illuminated only when the compressor is cycling.
The temp controller is an analog controller, but is set up using a relay contact for digital control with a 1 degree deadband.
http://www.auberins.com/index.php?ma...products_id=14

The stainless backsplash and trim around the temp controller were both cut from a SS door kick I had laying around.

 
Reply With Quote
Old 02-25-2012, 11:38 PM   #8
hillhousesawdustco
HBT_LIFETIMESUPPORTER.png
 
hillhousesawdustco's Avatar
Recipes 
 
Jan 2011
up near babb, mt
Posts: 646
Liked 35 Times on 34 Posts


I really like that SS plate around the temp controller- nice work!

 
Reply With Quote
Old 02-26-2012, 01:07 AM   #9
redstache
 
redstache's Avatar
Recipes 
 
Oct 2011
Kingsport, TN
Posts: 16

Quote:
Originally Posted by hillhousesawdustco View Post
I really like that SS plate around the temp controller- nice work!
Agreed. The stainless is a nice touch. Can you post some photos of how you mounted the plate. How did you avoid tubing in the wall of the freezer? Did you remove the original thermostat?
__________________
--
The Red Stache

 
Reply With Quote
Old 02-26-2012, 01:50 AM   #10
KKreisler
Recipes 
 
Oct 2011
farmington, MN
Posts: 9

Thanks for the complements,
I will try to snap some more pics later, but to answer the questions
The when I cut the pieces of stainless I drilled and countersunk the mounting holes.
I attached the controller plate over the existing t-stat opening in the front of the freezer with stainless countersunk sheet metal screws.
I attached the backsplash with the ss screws that came with the door kick plate.
the holes for the shanks were laid out in the back plate, 1/4 center hole were drilled, then I punched them out using a 7/8" Knock out set.
I then attached the splash plate to the collar and used my drill press and 7/8" spade bit through the holes in the ss plate to bore the holes in the oak collar.

when I removed the original t-stat, the probe was installed in a capillary behind the compressor that was sealed with a rubber cap.
I pulled the temp probe out and pushed the RTD probe that I used into the capillary. It was a tight fit, and it is not in as far as the original probe was, but it is in far enough to be accurate as I checked it against a wireless thermometer I have and they were less than two degrees different.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My Keezer Build josh79 Kegerators & Keezers 39 08-21-2016 07:44 PM
The keezer build is finally finished! Keezer porn attached. GRHunter Kegerators & Keezers 21 08-31-2014 01:16 AM
Jersh's Keezer build... Keezer thread #1,493,829 Jersh Kegerators & Keezers 40 05-22-2014 12:19 PM
My keezer build kstater Kegerators & Keezers 5 11-16-2010 03:42 AM
made some progress on my bar build/ keezer build 802VermontHomebrew Kegerators & Keezers 17 08-22-2010 01:20 PM


Forum Jump