Speidel Braumeister Modifications - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > General Beer Discussion > Speidel Braumeister Modifications

Reply
 
Thread Tools
Old 02-24-2012, 08:00 PM   #1
FiveKaiBrewing
 
FiveKaiBrewing's Avatar
Recipes 
 
Feb 2011
Posts: 125
Liked 5 Times on 5 Posts



Hey guys,

Lets use this thread to list modifications you have done to the Braumeister.

start listing them!
__________________
Bene+dic, Domine, creaturam istam cerevisae, quam ex adipe frumenti producere dignatus es: ut sit remedium salutare humano generi: et praesta per invocationem nominis tui sancti, ut, quicumque ex ea biberint, sanitatem corporis, et animae tutelam percipiant. Per Christum Dominum nostrum. Amen

 
Reply With Quote
Old 02-24-2012, 08:03 PM   #2
FiveKaiBrewing
 
FiveKaiBrewing's Avatar
Recipes 
 
Feb 2011
Posts: 125
Liked 5 Times on 5 Posts


this one was posted by bach.
valve

Yes it is SS9007 12-8

The BM side of the nipple is the 3/4" BSPP/ISO (british standard pipe parallel) and the ball valve side is the 1/2" NPT

My reason was to eliminate any parts, which would be restricting the
flow, since I recirculate and whirlpool.
It works great.

It is pricey - I paid $65 at local distributor

http://www.adaptall.com/products/stainless/ss9007.html
__________________
Bene+dic, Domine, creaturam istam cerevisae, quam ex adipe frumenti producere dignatus es: ut sit remedium salutare humano generi: et praesta per invocationem nominis tui sancti, ut, quicumque ex ea biberint, sanitatem corporis, et animae tutelam percipiant. Per Christum Dominum nostrum. Amen

 
Reply With Quote
Old 02-24-2012, 08:15 PM   #3
wreals
 
wreals's Avatar
Recipes 
 
Apr 2009
San Diego
Posts: 125
Liked 3 Times on 3 Posts


Quote:
Originally Posted by FiveKaiBrewing View Post
this one was posted by bach.
valve

Yes it is SS9007 12-8

The BM side of the nipple is the 3/4" BSPP/ISO (british standard pipe parallel) and the ball valve side is the 1/2" NPT

My reason was to eliminate any parts, which would be restricting the
flow, since I recirculate and whirlpool.
It works great.

It is pricey - I paid $65 at local distributor

http://www.adaptall.com/products/stainless/ss9007.html
Strange. I don't see "SS9007 12-8" on that page.
__________________
- Bill Reals
www.reals.net

 
Reply With Quote
Old 02-24-2012, 08:25 PM   #4
FiveKaiBrewing
 
FiveKaiBrewing's Avatar
Recipes 
 
Feb 2011
Posts: 125
Liked 5 Times on 5 Posts


maybe you have to call they state they have many other sizes that arnt listed.
__________________
Bene+dic, Domine, creaturam istam cerevisae, quam ex adipe frumenti producere dignatus es: ut sit remedium salutare humano generi: et praesta per invocationem nominis tui sancti, ut, quicumque ex ea biberint, sanitatem corporis, et animae tutelam percipiant. Per Christum Dominum nostrum. Amen

 
Reply With Quote
Old 02-24-2012, 08:38 PM   #5
wreals
 
wreals's Avatar
Recipes 
 
Apr 2009
San Diego
Posts: 125
Liked 3 Times on 3 Posts


For those of you wanting to order this from this company. They do not sell to the general public but only to companies. If you want to purchase, you need to got thru a dealer.
__________________
- Bill Reals
www.reals.net

 
Reply With Quote
Old 02-25-2012, 07:27 AM   #6
DeGarre
Recipes 
 
Jun 2011
Mommila, Finland
Posts: 157
Liked 9 Times on 8 Posts


None to list - 20L BM doesn't need any modifications.

No dip tube: unit is light enough to tilt forward to get the goodness out.
No special spigot: outflow is fast enough.

Only extra thing I do that comes into mind is that I tie the top mesh filter to the metal grill with 6 pieces of short metal wire.

Only thing I'd change at the factory would be to round the edges of the legs as they are quite sharp and I've cut myself a few times.

Okey, the handle on the lid could be easier to grab but that's it.

I just wanted to say this in case someone who is thinking about buying the 20L system gets the idea mods and customisation is needed for BM to work properly.

 
Reply With Quote
Old 02-25-2012, 01:58 PM   #7
FiveKaiBrewing
 
FiveKaiBrewing's Avatar
Recipes 
 
Feb 2011
Posts: 125
Liked 5 Times on 5 Posts


a good mod would be to use plasti dip on the legs.

http://www.plastidip.com/

you would have to suspend the braumeister in the air pust the platidip in a container (tupperware for example) and dip the legs in it and let dry.

this should give you a nice rubber coating on the legs that wont cut you or sctch any surface you put it on. ive done this to a couple of things in the garage never thought about the braumeister. but it does need it those legs come to sharp and scratch my countertop if i tilt or mobe it a bit while brewinbg
__________________
Bene+dic, Domine, creaturam istam cerevisae, quam ex adipe frumenti producere dignatus es: ut sit remedium salutare humano generi: et praesta per invocationem nominis tui sancti, ut, quicumque ex ea biberint, sanitatem corporis, et animae tutelam percipiant. Per Christum Dominum nostrum. Amen

maducey Likes This 
Reply With Quote
Old 02-25-2012, 01:59 PM   #8
FiveKaiBrewing
 
FiveKaiBrewing's Avatar
Recipes 
 
Feb 2011
Posts: 125
Liked 5 Times on 5 Posts


I really dont think it needs anything but people are always trying to make things better and if it works then ill apply it to mine.

any one havethe insulating jacket? does it work? i like the look of the copper top also but man 300 bucks thats steep...

Quote:
Originally Posted by DeGarre View Post
None to list - 20L BM doesn't need any modifications.

No dip tube: unit is light enough to tilt forward to get the goodness out.
No special spigot: outflow is fast enough.

Only extra thing I do that comes into mind is that I tie the top mesh filter to the metal grill with 6 pieces of short metal wire.

Only thing I'd change at the factory would be to round the edges of the legs as they are quite sharp and I've cut myself a few times.

Okey, the handle on the lid could be easier to grab but that's it.

I just wanted to say this in case someone who is thinking about buying the 20L system gets the idea mods and customisation is needed for BM to work properly.
__________________
Bene+dic, Domine, creaturam istam cerevisae, quam ex adipe frumenti producere dignatus es: ut sit remedium salutare humano generi: et praesta per invocationem nominis tui sancti, ut, quicumque ex ea biberint, sanitatem corporis, et animae tutelam percipiant. Per Christum Dominum nostrum. Amen

 
Reply With Quote
Old 02-25-2012, 09:03 PM   #9
Refly
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Mar 2011
Bayport, NY
Posts: 79
Liked 4 Times on 3 Posts


Quote:
Originally Posted by FiveKaiBrewing View Post
I really don't think it needs anything but people are always trying to make things better and if it works then ill apply it to mine.

any one have the insulating jacket? does it work? i like the look of the copper top also but man 300 bucks thats steep...
I have the insulating jacket and the copper top. The jacket works fine as far as I can tell. I've never used it without the jacket and the boil is fine.

The copper top is a bit disappointing. It looks nice, it makes a great funnel for grain if you invert it, but when used as intended mine drips condensation around the sides. It also seems to make a boil over more likely and of course you can't really see it building inside the dome. I've come close to boil over a few times and you wind up with your hops all over the sides of the BM rather than in the wort. I use the top sparingly.

If I had to do it again I'd get the jacket and forget the the copper top.

Other than that I can't really say that I see the need for any modifications (plug aside!). It works as advertised. I've never had funneling or other issues, I just tilt the unit forward rather than using a dip tube, etc...

 
Reply With Quote
Old 02-26-2012, 05:02 AM   #10
bach
Recipes 
 
Aug 2010
Minneapolis
Posts: 25
Liked 1 Times on 1 Posts


Quote:
Originally Posted by wreals View Post
For those of you wanting to order this from this company. They do not sell to the general public but only to companies. If you want to purchase, you need to got thru a dealer.
Correct - call ADAPT ALL and ask who is the local dealer in your area.
In Twin Cities it is Quest engineering.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Speidel Plastic Tanks triangulum33 General Beer Discussion 593 07-08-2016 09:07 PM
Speidel Braumeister (brewmaster) FiveKaiBrewing Equipment/Sanitation 2557 02-08-2016 10:42 AM
The Braumeister electric brewing system. Paymygasbill77 General Beer Discussion 7 12-14-2012 05:05 PM
Lager recipe for the spiedel braumeister 50l edubrueurope General Beer Discussion 10 04-05-2012 10:04 PM
braumeister noobster101 General Beer Discussion 22 06-03-2010 03:50 PM


Forum Jump