Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Missed my OG by 13 points!
Reply
 
Thread Tools
Old 02-20-2012, 07:00 PM   #1
s2cmpugh
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Richmond, VA
Posts: 245
Default Missed my OG by 13 points!

Hey everyone. To start, I'm only on my third all grain batch. Here is the recipe I used today:

6lbs wheat malt
4lbs munich
.25 lbs chocolate
1 oz hallertauer @60
.25 oz hallertauer @15
WLP300

I mashed in at 155 for about 70 minutes with 15qts. of water then batched sparged with 4.75 gallon of water at about 170-172. I did my first runnings, then added the sparge water and stirred for about a minute then drained into the kettle.

Beersmith said my pre-boil OG should be 1.045, but I got 1.033 after temperature adjustment. It also said my estimated OG gravity should be 1.055, but I only got 1.042. What the hell happened??

My last brew I did (all grain) came to within 3 points of my target OG.

Please help!


s2cmpugh is offline
 
Reply With Quote
Old 02-20-2012, 07:05 PM   #2
BrewKnurd
Formerly discnjh
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
BrewKnurd's Avatar
Recipes 
 
Join Date: Mar 2011
Location: Prairieville, LA
Posts: 2,765
Liked 242 Times on 201 Posts
Likes Given: 112

Default

wheat malt has smaller kernels, so if the grain mill wasn't adjusted, its possible your wheat malt had a poor crush....


__________________
Fake it til you make it.
BrewKnurd is offline
 
Reply With Quote
Old 02-20-2012, 07:15 PM   #3
slarkin712
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
slarkin712's Avatar
Recipes 
 
Join Date: Sep 2011
Location: St. Louis, MO
Posts: 772
Liked 48 Times on 44 Posts
Likes Given: 6

Default

First thing that comes to mind is that you had a bad grain crush. One other thing that it might be is that your thermometer isn't correct and that you mashed at a temp that didn't yield much extract. But most likely it is your crush.
slarkin712 is offline
 
Reply With Quote
Old 02-20-2012, 08:54 PM   #4
tre9er
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Lincoln, NE
Posts: 4,372
Liked 236 Times on 197 Posts
Likes Given: 35

Default

I'm not positive but if you're using wheat malt you might consider double crushing it if you can't adjust the gap.
__________________
_________________________________
Skal!
Den Faaborg Bryggeri

Quote:
Originally Posted by davekippen View Post
Open log Fermenting and gas-can secondary?? I am planning my next brew right now!!
tre9er is offline
 
Reply With Quote
Old 02-20-2012, 09:56 PM   #5
Toga
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Michigan
Posts: 827
Liked 47 Times on 41 Posts
Likes Given: 4

Default

My guess is your crush as others have mentioned or your sparge. Easy remedy is get a pound of wheat dme and a half pound of extra light or light dme and do a mini boil with a half gallon of water or less if you don't have much room in the fementer for 15 min. Cool then add it in. This will get you close to where you wanted your OG plus.
Toga is offline
 
Reply With Quote
Old 02-20-2012, 11:28 PM   #6
s2cmpugh
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Richmond, VA
Posts: 245
Default

Thanks for the help everyone. My LHBS milled the grains for me so I don't know anything about the setting or size he used, but not crushing the wheat malt enough sounds about right.

I only have about half a pound of dark DME so I'm not sure if that will really make a difference, or will it?

How can I prevent this in the future when using what malt? Ask him to mill it twice next time around?

Thanks for all the help!
s2cmpugh is offline
 
Reply With Quote
Old 02-21-2012, 12:17 PM   #7
s2cmpugh
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Richmond, VA
Posts: 245
Default

So I think I may have time today to swing by the lhbs and purchase some wheat dme. Will one pound be enough?

Boil for a few mins., then open fermenter and slowly add or add it quickly?

Thanks for the help! I really think it's the crush because my previous AG batch came out real close following the same batch technique.
s2cmpugh is offline
 
Reply With Quote
Old 02-21-2012, 01:54 PM   #8
Toga
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Michigan
Posts: 827
Liked 47 Times on 41 Posts
Likes Given: 4

Default

If fermentation has really taken off I would add it in via a bottle wand or transfer in via tubing from the bottom up using a bottling bucket to minimize oxidation. If you secondary you could always rack on top of it
Toga is offline
 
Reply With Quote
Old 02-21-2012, 03:22 PM   #9
s2cmpugh
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Richmond, VA
Posts: 245
Default

Quote:
Originally Posted by Toga View Post
If fermentation has really taken off I would add it in via a bottle wand or transfer in via tubing from the bottom up using a bottling bucket to minimize oxidation. If you secondary you could always rack on top of it
It just started bubbling this morning. I was thinking I could remove the top, then slowly pour my boiled and cooled extract addition along the side of the bucket to help reduce the introduction of oxygen. I'm trying to avoid having to mix up a batch of starsan, etc. and keep it simple.

Will this lazy methed work?


s2cmpugh is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Missed OG by 20 points? iahebert All Grain & Partial Mash Brewing 6 05-04-2011 06:41 PM
Missed SG by 20 points jerryalan All Grain & Partial Mash Brewing 17 12-05-2010 12:54 AM
missed OG by 15 points! opteek All Grain & Partial Mash Brewing 3 05-03-2010 09:31 PM
missed OG by nearly 10 points slim chillingsworth All Grain & Partial Mash Brewing 5 05-23-2008 10:26 PM
1st AG - missed SG by 8 points griffondg All Grain & Partial Mash Brewing 9 08-14-2007 09:56 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS