Home Brew Forums > Home Brewing Beer > Recipes/Ingredients > Thoughts on my English Brown Ale Recipe
Reply
 
Thread Tools
Old 02-13-2012, 03:25 PM   #1
scottvin
Feedback Score: 1 reviews
Recipes 
 
Join Date: Feb 2012
Location: Hicksville, NY
Posts: 381
Liked 13 Times on 11 Posts
Likes Given: 4

Default Thoughts on my English Brown Ale Recipe

After I brewed two kits, I remembered that all the fun is in making your own kits! I am going after Nut Brown Ale type of beer. Here is what I have come up with so far! Thoughts, comments, corrections?

Thanks in advance!


Click image for larger version

Name:	southern english ale.jpg
Views:	1486
Size:	57.8 KB
ID:	47892  
scottvin is offline
 
Reply With Quote
Old 02-13-2012, 04:51 PM   #2
14thstreet
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Milwaukee, WI
Posts: 405
Liked 12 Times on 10 Posts
Likes Given: 1

Default

I believe biscuit malt must be mashed in order to get what you want out of it. That means I would replace your dark dry extract with a pound of pale grain malt. Steep at 150-160F for 30 minutes to an hour (yes, this is a partial mash) and be sure to rinse the grains with additional water. You might need to adjust your gravity up with some additional dry amber malt if you have some.

Ideally, I would only use pale malt extract (dry or liquid) as a source for fermentable sugar as that allows one to control character by addition of specific grains in a specific amount. You may otherwise not know what you are adding when using a darker extract.

Getting rid of some of the crystal malt found in the darker extracts will also help unmask the nuttiness/roastiness/chocolate notes you'll get from using your chocolate and biscuit. About the balance, I'm an all-grain brewer and in my first nut brown I used 10% crystal, 10% amber and 2% chocolate (similar to biscuit). I felt I could have reduced the crystal by half to bring out more of the "nuttiness" of the other malts.

In your case, I think if you just steeped the biscuit malt you wouldn't get the contribution you are looking for. Overall you are on the right track, I'd drink it!


__________________
Fermenters: Helles, Oktoberfest
Bottled: Old Peculier, Dopplebock, Belgian ale with homemade candi syrup (2 varieties), Berliner weisse
Kegs: Bitter
On Deck: Hefeweizen
14thstreet is offline
 
Reply With Quote
Old 02-13-2012, 05:05 PM   #3
scottvin
Feedback Score: 1 reviews
Recipes 
 
Join Date: Feb 2012
Location: Hicksville, NY
Posts: 381
Liked 13 Times on 11 Posts
Likes Given: 4

Default

Explain this part - "Steep at 150-160F for 30 minutes to an hour (yes, this is a partial mash) and be sure to rinse the grains with additional water."

How much water should I rinse it with and should that water be at 170F?
scottvin is offline
 
Reply With Quote
Old 02-13-2012, 05:23 PM   #4
scottvin
Feedback Score: 1 reviews
Recipes 
 
Join Date: Feb 2012
Location: Hicksville, NY
Posts: 381
Liked 13 Times on 11 Posts
Likes Given: 4

Default

How is this for an update?

1 1/2 lb - Light Dry Extract
3.15 lb - NB Gold Malt Syrup
1/4 lb - Chocolate Malt
1/2 lb - Biscuit Malt
1/2 lb - Special B Malt
1 lb Pale Malt

1 ounce Fuggles
Wyeast British Ale Yeast
scottvin is offline
 
Reply With Quote
Old 02-14-2012, 04:47 AM   #5
14thstreet
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Milwaukee, WI
Posts: 405
Liked 12 Times on 10 Posts
Likes Given: 1

Default

If you haven't already, check out Deathbrewer's partial mash instructional here. That should help you answer your questions. Your updates look good, brew on!
__________________
Fermenters: Helles, Oktoberfest
Bottled: Old Peculier, Dopplebock, Belgian ale with homemade candi syrup (2 varieties), Berliner weisse
Kegs: Bitter
On Deck: Hefeweizen
14thstreet is offline
 
Reply With Quote
Old 02-14-2012, 06:45 PM   #6
scottvin
Feedback Score: 1 reviews
Recipes 
 
Join Date: Feb 2012
Location: Hicksville, NY
Posts: 381
Liked 13 Times on 11 Posts
Likes Given: 4

Default

How is this for instructions?

Mash Ingredients
1 lbs Pale Malt (2 Row) US (2.0 SRM) Grain 1 14.0 %
8.0 oz Biscuit Malt (23.0 SRM) Grain 2 7.0 %
8.0 oz Chocolate Malt (450.0 SRM) Grain 3 7.0 %
8.0 oz Special B Malt (180.0 SRM) Grain 4 7.0 %

Mash In Add 3.13 qt of water at 163.7 F 152.0 F 60 min
Mash Out Add 1.75 qt of water at 200.7 F 168.0 F 10 min

Fly sparge with 2.75 gal water at 168.0 F

Boil Wort

1 lbs 8.0 oz Light Dry Extract (8.0 SRM) 5 21.0 %
3 lbs 2.4 oz Pale Liquid Extract (8.0 SRM) Extract 6 44.1 %

2.00 oz Fuggles [4.50 %] -Boil 60.0 min Hop 7 25.4 IBUs

1.0 pkg British Ale Yeast (Wyeast Labs #1098)
scottvin is offline
 
Reply With Quote
Old 03-03-2012, 07:42 PM   #7
scottvin
Feedback Score: 1 reviews
Recipes 
 
Join Date: Feb 2012
Location: Hicksville, NY
Posts: 381
Liked 13 Times on 11 Posts
Likes Given: 4

Default

I brewed this today and went all-grain and BIAB. Here is the final recipe:

7 lbs Pale Malt (2 Row) US (2.0 SRM)
1 lbs Biscuit Malt (23.0 SRM)
8.0 oz Chocolate Malt (450.0 SRM)
8.0 oz Special B Malt (180.0 SRM)
1.00 oz Fuggles [4.50 %] - Boil 60.0 min
0.50 oz Fuggles [4.50 %] - Boil 15.0 min
1.0 pkg British Ale (White Labs #WLP005) [35.49 ml]

I ended up with a OG of 1.048 - about 75% efficiency.. not too bad for my first all grain!

I am planning on three weeks in the primary then bottling.
scottvin is offline
 
Reply With Quote
Old 03-06-2012, 02:08 PM   #8
scottvin
Feedback Score: 1 reviews
Recipes 
 
Join Date: Feb 2012
Location: Hicksville, NY
Posts: 381
Liked 13 Times on 11 Posts
Likes Given: 4

Default

Well, I noticed the blowoff tube had stopped bubbling yesterday morning so I decided to take a sample this morning. The hydrometer read 1.020 - I didn't realize the gravity would come down so quick. I am going to let it sit for a full three (maybe four) weeks but how much lower can this get to?

Also, the krausen had fallen completely and didn't look like it got too high.

Thanks!
scottvin is offline
 
Reply With Quote
Old 03-06-2012, 02:42 PM   #9
Yooper
Ale's What Cures You!
HBT_ADMIN.png
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: UP of Michigan
Posts: 65,923
Liked 6208 Times on 4421 Posts
Likes Given: 1656

Default

Quote:
Originally Posted by scottvin View Post
Well, I noticed the blowoff tube had stopped bubbling yesterday morning so I decided to take a sample this morning. The hydrometer read 1.020 - I didn't realize the gravity would come down so quick. I am going to let it sit for a full three (maybe four) weeks but how much lower can this get to?

Also, the krausen had fallen completely and didn't look like it go too high.

Thanks!
If you mashed at a lower temp, it could easily get to 1.008 or 1.010. If you mashed at a higher temp, it might stop at 1.012-1.016 or so.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

Follow me on facebook: https://www.facebook.com/lorena.t.evans
But I'm pretty boring so don't expect much!
https://www.facebook.com/lorena.t.evans
Yooper is online now
 
Reply With Quote
Old 03-06-2012, 03:41 PM   #10
scottvin
Feedback Score: 1 reviews
Recipes 
 
Join Date: Feb 2012
Location: Hicksville, NY
Posts: 381
Liked 13 Times on 11 Posts
Likes Given: 4

Default

Quote:
Originally Posted by Yooper View Post
If you mashed at a lower temp, it could easily get to 1.008 or 1.010. If you mashed at a higher temp, it might stop at 1.012-1.016 or so.
I mashed around 155-157. Could it be nearly done already?


scottvin is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need some thoughts on my English IPA recipe Duckfoot Recipes/Ingredients 3 10-13-2011 03:37 AM
English Brown Ale AG Recipe wittmania Recipes/Ingredients 2 08-24-2011 08:50 PM
English Barley Wine Recipe - Any thoughts? Lie2vaRK Recipes/Ingredients 6 10-08-2009 03:08 PM
Feedback on an English Brown Ale recipe KenDawg19 Recipes/Ingredients 4 08-27-2009 01:20 PM
English Brown or Nut Brown recipe Proofman Recipes/Ingredients 6 03-21-2007 12:08 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS