shank size and collar thickness - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > shank size and collar thickness

Reply
 
Thread Tools
Old 02-12-2012, 02:51 AM   #1
Billybrewer09
Recipes 
 
Mar 2011
Chester, IL
Posts: 437
Liked 15 Times on 12 Posts



I have read a lot of the keezer build threads and can't find the answer I need. I plan on having three taps on my keezer w/ collar. How thick are most of you making you'r collar and how long of a shank do I need.
thanks for all the help.

 
Reply With Quote
Old 02-12-2012, 03:30 AM   #2
Xtant
HBT_LIFETIMESUPPORTER.png
 
Xtant's Avatar
Recipes 
 
Nov 2008
Lexington, KY
Posts: 360
Liked 30 Times on 22 Posts


I have 4" shanks. Wood is 1" thick, so is the insulation.
__________________
"Make sure that the beer - four pints a week - goes to the troops under fire before any of the parties in the rear get a drop." -Winston Churchill to his Secretary of War, 1944

 
Reply With Quote
Old 02-12-2012, 04:47 AM   #3
Billybrewer09
Recipes 
 
Mar 2011
Chester, IL
Posts: 437
Liked 15 Times on 12 Posts


Thanks Xtant, that helps alot. I am going to order all my hardware tomorrow and wanted to make sure I ordered the right things.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Magic Chef 7.2 Cu. Ft. Chest Freezer Collar Size Bean Kegerators & Keezers 13 06-09-2011 12:07 PM
DIY thermowell and SS wall thickness? JohnnyGunn Kettles, Mash Tuns & Hot Liquor Tanks 2 06-03-2011 09:26 PM
Shank size holes in wood? bmickey Kegerators & Keezers 9 02-24-2011 03:51 AM
Door mount fauct on a Sanyo 4912. What size shank?? Gritsak Kegerators & Keezers 2 09-30-2009 01:49 PM


Forum Jump