BCS: Logging when an output is on. - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > BCS: Logging when an output is on.

Reply
 
Thread Tools
Old 02-07-2012, 03:43 PM   #1
xsists
Recipes 
 
Nov 2006
Waukesha, WI
Posts: 379
Liked 10 Times on 9 Posts



I am currently testing between two different controls for my keezer and I want to know if there was a way to log when an output was on. I tried to do it in the data logger by selecting the output as the trace but its not showing me anything. I want to know how frequently the compressor turns on. I can't get to the ECC forum for some reason so that's why I am asking here. I know there are a few of you out there with this system. Any help would be greatly appreciated.

 
Reply With Quote
Old 02-08-2012, 02:07 PM   #2
ChuckO
HBT_LIFETIMESUPPORTER.png
 
ChuckO's Avatar
Recipes 
 
Oct 2008
Keyrock, WV
Posts: 1,022
Liked 144 Times on 103 Posts


Setting the vertical scale to low=0 and high=200 will display the cycle on/off graph.

 
Reply With Quote
Old 02-08-2012, 02:35 PM   #3
xsists
Recipes 
 
Nov 2006
Waukesha, WI
Posts: 379
Liked 10 Times on 9 Posts


Yeah, I was able to get the answer on the ECC forum. Came back up. Turns out in the new firmware version the activation was changed from 0/1 to 0/100.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
E-Herms Stirrer Necessary if Temp Measured at Wort Output? hundy Electric Brewing 4 02-03-2012 09:28 PM
what do i need for a pid output LandofOZ Electric Brewing 1 01-20-2012 04:05 AM


Forum Jump