Keezer Build - Tips and Lessons Learned - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Keezer Build - Tips and Lessons Learned

Reply
 
Thread Tools
Old 02-04-2012, 10:09 PM   #1
dahappycamper
Recipes 
 
Feb 2012
Mason, OH
Posts: 48
Liked 5 Times on 4 Posts



First, want to thank everyone for the great posts and advice on building a keezer. Just got mine done and wanted to share what I learned along the way. My best work was on the air circulation and collar insulation design, so I'll focus on that the most.

Started with a GE 7.0 cu. ft. Chest Freezer in White Model # FCM7SUWW from Home Depot ($179). This will hold 4 cornys, with ease.

Had a minor ding in it, and final price was $105, delivered. Yup, you get a $75 rebate if it comes damaged. Off to a great start.




Reason: add photo

2
People Like This 
Reply With Quote
Old 02-04-2012, 10:15 PM   #2
dahappycamper
Recipes 
 
Feb 2012
Mason, OH
Posts: 48
Liked 5 Times on 4 Posts


The first big debate is collar fixed to the base - or fixed to the lid. Given that this is a beer keezer - and I will be sampling home brews as I tinker - went with the collar up - to keep the shanks, etc out of the way and safe.

Makes it a little more involved to build - but not much.





 
Reply With Quote
Old 02-04-2012, 10:37 PM   #3
dahappycamper
Recipes 
 
Feb 2012
Mason, OH
Posts: 48
Liked 5 Times on 4 Posts


I'm planning on having 4 taps, so the kegs will be packed in good. My solution for good air circulation - keeps kegs off the ground, room for airflow, and ability to spread the hot air around. Version 1 of the air circulation system...PVC and wire shelf. No need to glue together, which saved me later. Drilled holes in all pieces, and can rotate to "aim". Final version has the PVC tube from fan in center back.


 
Reply With Quote
Old 02-04-2012, 10:43 PM   #4
dahappycamper
Recipes 
 
Feb 2012
Mason, OH
Posts: 48
Liked 5 Times on 4 Posts


Used a waterproof boat bilge fan - caulked to a PVC reducer. This connects to the PVC pipe platform to circulate air around the base of the kegs.

__________________
Primary -
Empty

Secondary -
Two Hearted Clone

Kegged -
Thanksgiving Brown Ale
Arrogant Bastard
(Mid)West Coast IPA
Sculpin IPA

 
Reply With Quote
Old 02-05-2012, 05:54 AM   #5
ToastedPenguin
Recipes 
 
Sep 2010
Oswego, IL
Posts: 280
Liked 2 Times on 1 Posts


Quote:
Originally Posted by dahappycamper View Post
Used a waterproof boat bilge fan - caulked to a PVC reducer. This connects to the PVC pipe platform to circulate air around the base of the kegs.

Awesome work!

What type of power supply did you use for the bilge fan? Is it constently on or is it controlled by temp?

David
__________________
________________________________________
Fermenting:
You Want MO Pale Ale
Secondary - Cyser & New England Hard Cider
Bottled: Nada
Kegged & OnTap: Bad Santa Stout, Jeep Trail Brown Ale, Red Skies at Night American Red, Panty Dropper Hard Cider


Quote:
Originally Posted by Hammy71 View Post
I'd go with the 2". You can always stir the wort with a sanitized spoon if your worried about hot/cold spots. You will be hitting the 6+" with everything...ask Ron Jeremy!

 
Reply With Quote
Old 02-05-2012, 09:06 AM   #6
nofriendsbz3
Recipes 
 
Nov 2011
oceanside, CA
Posts: 3

Genius.... I have the same exact freezer and same blower.. I just havent figured a way to get the kegs off of the floor and a way to circulate the air... simply Genius!!!

 
Reply With Quote
Old 02-05-2012, 10:19 AM   #7
TomSD
Da Geek
HBT_LIFETIMESUPPORTER.png
 
TomSD's Avatar
Recipes 
 
Aug 2010
Lemon Grove, CA, CA
Posts: 1,361
Liked 33 Times on 24 Posts


I like the circulation solution. Mine is a quick and dirty duct tube down to the bottom and some grating keeping the kegs off the floor. I might have to give yours a shot to clear up some space on the hump.

Great job.
__________________

Johnson Controller rewire
| Keezer (FCM7SUWW) build | Love Controller box build | Soda Syrups/Concentrates

God is an imaginary friend for grownups., Walter Crewes (Morgan Freeman), The Big Bounce

Don't be afraid to ask dumb questions they're easier to handle than dumb mistakes!

 
Reply With Quote
Old 02-05-2012, 02:42 PM   #8
dahappycamper
Recipes 
 
Feb 2012
Mason, OH
Posts: 48
Liked 5 Times on 4 Posts


Still working on the right power supply. The one I tried first had too low amps, and heated up pretty quick. The fan is 2.6 A, and 12V, but I don't want it on full speed. From what I have read, I need a supply with 2.6 A or more, and variable voltage so I can adjust the speed. Will be looking this week and post what I find. Any advice is appreciated...well, almost any

I plan to have it on all the time to keep a constant temp (no temp layers). This seemed to work well with the power supply I tried first. I think this would also reduce the frequency of the compressor going on.
__________________
Primary -
Empty

Secondary -
Two Hearted Clone

Kegged -
Thanksgiving Brown Ale
Arrogant Bastard
(Mid)West Coast IPA
Sculpin IPA

 
Reply With Quote
Old 02-05-2012, 02:52 PM   #9
dahappycamper
Recipes 
 
Feb 2012
Mason, OH
Posts: 48
Liked 5 Times on 4 Posts


Quote:
Originally Posted by TomSD View Post
I like the circulation solution. Mine is a quick and dirty duct tube down to the bottom and some grating keeping the kegs off the floor. I might have to give yours a shot to clear up some space on the hump.

Great job.
Tom - Your post was real inspiration for me, and the main guide I used for my build.

The air system is really easy to build, and inexpensive. I think you have the same bilge fan already. I just took a reducer and used a very heavy bead of silicone caulk to attach it to the adapter. Here's a close up..... hope it helps.

__________________
Primary -
Empty

Secondary -
Two Hearted Clone

Kegged -
Thanksgiving Brown Ale
Arrogant Bastard
(Mid)West Coast IPA
Sculpin IPA

 
Reply With Quote
Old 02-05-2012, 03:20 PM   #10
microbusbrewery
Senior Member
HBT_SUPPORTER.png
 
microbusbrewery's Avatar
Recipes 
 
Jan 2011
West Jordan, UT
Posts: 1,781
Liked 212 Times on 169 Posts


Very nice build. I like how you've routed your lines for a very clean look. Does the little bottle with the blue cap hold your temp probe?


__________________
http://www.microbusbrewery.org/

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
The keezer build is finally finished! Keezer porn attached. GRHunter Kegerators & Keezers 21 08-31-2014 01:16 AM
Jersh's Keezer build... Keezer thread #1,493,829 Jersh Kegerators & Keezers 40 05-22-2014 12:19 PM
pump / tubing - lessons learned anonymousbrew Kettles, Mash Tuns & Hot Liquor Tanks 14 12-14-2010 06:36 PM
Homemade Stir Plate - Lessons Learned & Tips MNBugeater Chillers & Stir Plates 16 11-01-2010 09:46 AM
made some progress on my bar build/ keezer build 802VermontHomebrew Kegerators & Keezers 17 08-22-2010 01:20 PM


Forum Jump