So I got the 7.2cf GE freezer from home depot and I just got it mostly put together. I have to add a few more beer lines and she'll be all done. Everything is pretty much the same as everyone else's so I think I will just talk about the little tweeks I made. Anybody has any questions, feel free to ask.
Here's what it looks like on the outside :
My keezer is going in the garage so I didn't feel the need to make it all fancy and stuff, I just wanted it all white so it wouldn't look too bad.
First off I decided that I wanted to insulate the collar but didn't want to see the insulation. So I have a 1x12 with a 1/2" thick piece of blue insulation board which will we covered up on the inside by an 1/8" thick piece of birch plywood on the inside. On the top and bottom edges I have a small strip of poplar so the edges would look nice and provide a good seal.
I forgot to mention I put aluminum foil in the middle as well to help with the r-value based on a recommendation from someone on here. Also before I put the inside skin on, I added some blocking to add extra support for gauges I would be mounting on the inside.