Coldbreak Brewing Giveaway - Winners Drawn!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Unexplained drop in efficiencies- HELP!
Reply
 
Thread Tools
Old 02-03-2012, 01:56 AM   #1
Copperpots_Brewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: Cleveland, OH
Posts: 239
Liked 2 Times on 2 Posts

Default Unexplained drop in efficiencies- HELP!

I have been brewing AG for about a year and a half and I have been using the same equipment the whole time (cooler MLT, 40qt pot). For the first year I was getting efficiencies in the high 70's and low 80's. For about the last 8 batches, I am struggling to hit 70%, and I have NO clue why! I can rule out my LHBS's grain mill, i have a friend who buys from the same store and he is hitting high 80's. The only changes to my equipment are I replaced my immersion chiller with a CounterFlow and my braided hose has gotten a little beat up, so I have to be extra sure i vorlauf.

Can anyone come up with any reasonable theories as to what is happening? All of my process has been consistent, and I've been real meticulous in making sure i'm hitting mash temps and holding them throughout the mash.


Copperpots_Brewing is offline
 
Reply With Quote
Old 02-03-2012, 02:04 AM   #2
Boohausen
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: Norton, Ma
Posts: 66
Likes Given: 2

Default

could be a few things, your malts could be older then what your buddy purchased, and the diastic power is less, its possible, also you could have cold spot in your mash, thats he most obvouis. other then that the manifold might be the issue, do a iodine test at least 3 times during your mash to rule out stale malts.


Boohausen is offline
 
Reply With Quote
Old 02-03-2012, 02:08 AM   #3
Copperpots_Brewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: Cleveland, OH
Posts: 239
Liked 2 Times on 2 Posts

Default

My friend often buys grains the same day I do, so i think we are using the same age grains. I've never done an iodine test, but I've read about it and i'll give that a shot. I tend to stir pretty well when doughing in, so unless a cold spot randomly creates itself, its pretty safe to say its all consistent. I'll try replacing the manifold and see if that improves anything.
Copperpots_Brewing is offline
 
Reply With Quote
Old 02-03-2012, 03:11 AM   #4
BigRob
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Toronto, Ontario
Posts: 703
Liked 35 Times on 27 Posts
Likes Given: 1

Default

If your friend isn't using the same process or equipment as you, the crush from the LHBS might work fine for him, and less fine for you.

I wouldn't rule out the grain mill based on what you've said, it seems to be a potential variable in your process.

Your water could have changed too(no mention of it, so I have no idea how likely that is).

Your thermometer might need recalibrating, they sometimes creep out 10-20 degrees or more, or it could be outright failing.
BigRob is offline
 
Reply With Quote
Old 02-03-2012, 11:10 PM   #5
tennesseean_87
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
tennesseean_87's Avatar
Recipes 
 
Join Date: Aug 2011
Location: Philly, PA
Posts: 1,201
Liked 87 Times on 63 Posts
Likes Given: 107

Default

Quote:
Originally Posted by BigRob View Post
If your friend isn't using the same process or equipment as you, the crush from the LHBS might work fine for him, and less fine for you.

I wouldn't rule out the grain mill based on what you've said, it seems to be a potential variable in your process.
Yeah, his process might be that much better than yours, theoretically, anyway. I'm not trying to be insulting, just saying you can't rule that out. Has his efficiency dropped at any point?


__________________
#8 Corks in Belgian Bottles Hold Carbonation
Increasing Pipeline Diversity
Fermenting: E Fitzgerald Porter, American Special Bitter, Light Lager (sorta between Helles and Vienna), Summer Session Saison
On Deck: White IPA, Tripel?, Pils? Hefe? Hoppy Brown?

Youtube Channel on Homebrewing ::: Youtube Channel on Pipe Smoking
tennesseean_87 is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
falling efficiencies SteveWheeler All Grain & Partial Mash Brewing 2 09-28-2011 12:53 AM
Efficiencies Question pirate252 All Grain & Partial Mash Brewing 8 12-09-2009 07:18 PM
Ridiculously low efficiencies, why??? beergutbrew All Grain & Partial Mash Brewing 7 09-02-2009 01:19 PM
Got a problem with my Efficiencies help please! Bowtiebrewery All Grain & Partial Mash Brewing 18 06-15-2009 07:24 PM
High Efficiencies... b767fo All Grain & Partial Mash Brewing 5 07-28-2008 01:37 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS