3/16 w/ 1/4 Bore - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > 3/16 w/ 1/4 Bore

Reply
 
Thread Tools
Old 02-02-2012, 07:25 AM   #1
Bonestar
Recipes 
 
Jul 2011
Vista, Ca
Posts: 48
Liked 1 Times on 1 Posts



Any foaming issues running 3/16" line and tail piece while using a shank with a 1/4" bore?



 
Reply With Quote
Old 02-02-2012, 03:06 PM   #2
Brewnoob1
Recipes 
 
Sep 2011
Puyallup, WA
Posts: 982
Liked 24 Times on 24 Posts


That's what most people are running I think. I know that's what I have and works fine.


__________________
Keg #1: Empty :(
Keg #2: Empty :(
Kegs 3-5: Empty :(

Ferment #1: Empty :(
Ferment #2: Empty :(
Ferment #3: Empty :(

On Deck: Something....Anything!!!

 
Reply With Quote
Old 02-02-2012, 03:07 PM   #3
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
 
IrregularPulse's Avatar
Recipes 
 
Nov 2007
Posts: 50,272
Liked 3337 Times on 3203 Posts


That's the most common setup. It's fine.
__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo's mom

 
Reply With Quote
Old 02-02-2012, 04:01 PM   #4
samc
Recipes 
 
Aug 2008
Portland OR
Posts: 5,387
Liked 62 Times on 58 Posts


Foaming issues would come from incorrect line length.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
3/16" tailpiece on 1/4" bore shank ocluke Bottling/Kegging 6 12-08-2011 12:41 PM
Shank - 1/4" Bore - thread size? coogee Bottling/Kegging 8 10-25-2011 09:49 AM
Shank bore size sdbrew1024 Bottling/Kegging 3 05-20-2011 03:05 AM
1/4" bore compared to a 3/16" bore on shank j1laskey Bottling/Kegging 3 06-15-2010 05:13 PM


Forum Jump