Missed OG by 10 points!!!! Over-sparge to blame? - Home Brew Forums

 Home Brew Forums > Missed OG by 10 points!!!! Over-sparge to blame?

02-02-2012, 06:03 AM   #1
BootsyFlanootsy
Recipes

Nov 2010
Posts: 207
Liked 7 Times on 5 Posts

Made a 5gallon batch tonight. OG was supposed to be 1.062. Preboil gravity was 1.044 which by my calculations with a 60min boil should have given my a post boil gravity of 1.057, ( this is before the addition of 12oz's of invert sugar at 15mins, which theoretically should have brought me up in the ballpark of my calculated OG),. However I wound up with an OG of 1.052!! WTF?!?

So I started thinking, I miscalculated my sparge water addition. I should've only added 4.61 gallons, but would up adding about 5.25. I overcollected by about a gallon.

My initial guess is this could be a big part of the culprit.

02-02-2012, 06:06 AM   #2
brewtus_
I say, lookey here son...

Recipes

Oct 2008
Dayton, Ohio
Posts: 240
Liked 23 Times on 15 Posts

What was your preboil volume? What was your final volume post boil?
__________________
The earlier you fall behind, the more time you have to catch up.

02-02-2012, 06:20 AM   #3
BootsyFlanootsy
Recipes

Nov 2010
Posts: 207
Liked 7 Times on 5 Posts

sorry, pre-boil was 6.5. post-boil was 5.

02-02-2012, 06:24 AM   #4
BootsyFlanootsy
Recipes

Nov 2010
Posts: 207
Liked 7 Times on 5 Posts

seeing that my pre-boil gravity was 1.044, I calculated 6.5 x 44=286. then 5gallons post boil so 286 divided by 5 = 57 giving me 1.057 OG - my late addition of invert sugar. putting me right close to the mark... at least in theory.

02-02-2012, 06:29 AM   #5
brewtus_
I say, lookey here son...

Recipes

Oct 2008
Dayton, Ohio
Posts: 240
Liked 23 Times on 15 Posts

You either had a poor sparge (not extracting enough of the sugars), poor mash efficiency or bad hydrometer readings. Did you take the gravity of the final runnings of your sparge? Gravity by refractometer or hydrometer? If hydrometer, did you correct for temperature?
__________________
The earlier you fall behind, the more time you have to catch up.

02-02-2012, 06:37 AM   #6
BootsyFlanootsy
Recipes

Nov 2010
Posts: 207
Liked 7 Times on 5 Posts

yeah Hydrometer. No, I didn't take a gravity reading until both the first runnings and the sparge were combined.

Guess it's time for me to bone up and buy a refractometer.

02-02-2012, 06:47 AM   #7
Frodo
Recipes

Nov 2009
Petersburg, AK
Posts: 1,034
Liked 28 Times on 27 Posts

According to the formula:
preboil GU x preboil volume = postboil GU x postboil volume

Are you sure you measured your preboil and postboil volumes accurately? How are you measuring the gravity? Maybe your refractometer is not reading consistently (I recently noticed mine isn't, much to my surprise), or alternatively your hydrometer sample wasn't cooled to 60F.

Edit: while writing I see you measured with a hydrometer... note my comment about my refractometer above... maybe it's not reading consistently because it's a chinese \$15 job.

02-02-2012, 06:59 AM   #8
brewtus_
I say, lookey here son...

Recipes

Oct 2008
Dayton, Ohio
Posts: 240
Liked 23 Times on 15 Posts

Rough estimate with BeerSmith, when starting with a 1.044 gravity with 6.5 gallons, your final gravity with 5 gallons minus the 12 oz sugar would be 1.054. Are you sure your volumes are correct?

A 60 minute boil with 6.5 gallons typically won't get to 5 gallons. Is your process repeatable to go from 6.5 to 5.0 gallons in only 60 minutes? I typically only lose 1 gallon in an hour, but everybody's set up is different.

Using the same calculation with the sugar added and 5.25 gallons post boil gives: 1.044 preboil, 1.052 post boil.
__________________
The earlier you fall behind, the more time you have to catch up.

02-02-2012, 02:12 PM   #9
tre9er

Recipes

Jan 2012
Lincoln, NE
Posts: 4,371
Liked 242 Times on 197 Posts

If I had to guess I'd say you had less than 6.5g preboil and slightly more than 5g post-boil. 6 gal preboil and 5.1g post-boil would come out 1.051.
__________________
_________________________________
Skal!
Den Faaborg Bryggeri

Quote:
 Originally Posted by davekippen Open log Fermenting and gas-can secondary?? I am planning my next brew right now!!

02-02-2012, 07:37 PM   #10
BootsyFlanootsy
Recipes

Nov 2010
Posts: 207
Liked 7 Times on 5 Posts

tre9er-

you are spot on sir. I just ran the numbers and that is precisely what happened. OK, this is very valuable to know, thanks everybody!