Bottle capper that doesn't "dimple" the cap - Page 2 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Bottle capper that doesn't "dimple" the cap

Reply
 
Thread Tools
Old 01-25-2012, 11:10 PM   #11
willjschmidt
Recipes 
 
Feb 2010
CA
Posts: 8

Damn, guess the Colonna can create a dent/dimple as well:

http://forum.northernbrewer.com/view...hp?f=1&t=87257

http://www.homebrewtalk.com/f35/colo...tations-92306/

http://www.homebrewtalk.com/f35/capp...23/#post726271

Looks like I'll check out the super agata.

 
Reply With Quote
Old 01-25-2012, 11:25 PM   #12
Tom2011
Recipes 
 
Nov 2011
Posts: 5

I have the super agata and i like it. I wish i bought the regular one because i keep lifting the lever too high and it raises up out of adjustment. I cork with the red Portuguese floor corker and love it

 
Reply With Quote
Old 01-26-2012, 12:07 AM   #13
smokinghole
Senior Member
HBT_LIFETIMESUPPORTER.png
 
smokinghole's Avatar
Recipes 
 
Nov 2009
Lucid Dream Land
Posts: 2,915
Liked 131 Times on 107 Posts


I use the Super Agata Bench Capper. I used a wing capper for like 2-3 batches and thought it sucked. I would never go back from a bench capper. I've sprayed it with pam to lube it up.
__________________
Going through life is hard.
Going through life stupid is harder.

 
Reply With Quote
Old 01-26-2012, 12:42 AM   #14
weirdboy
HBT_LIFETIMESUPPORTER.png
Recipes 
 
May 2009
Los Angeles
Posts: 8,202
Liked 488 Times on 394 Posts


Maybe you need to adjust the height/depth of the bell properly and it won't create a dimple. It could be as easy as turning a screw, or maybe swapping out an existing standoff with a screw you can adjust and a locknut.

 
Reply With Quote
Old 01-26-2012, 01:09 AM   #15
ClaudiusB
Recipes 
 
Dec 2007
El Paso, Texas
Posts: 1,350
Liked 99 Times on 76 Posts


Quote:
Originally Posted by willjschmidt View Post
I've got this capper: http://morebeer.com/view_product/156..._Capper_-_Brev

It places a dimple in the middle of every cap.
Does it look like as pictured?



If it does, the ring is from the bell.
The bell should be a 26 mm bell not 28 or 30mm for standard crowns.
Excess force will do it too or lousy made bell.
I used excess force to create the ring as pictured.
My capper is a pneumatic version.



If it is a dimple from the ejector pin with magnet you may be able to adjust the retracted position.
Put the capper wing arms down and look at the ejector, should behind or close to the bell's ring.
If not unscrew the bell a few turns until pin is in the correct position.

Edit:weirdboy typed faster

Cheers,
ClaudiusB

 
Reply With Quote
Old 01-26-2012, 03:34 AM   #16
willjschmidt
Recipes 
 
Feb 2010
CA
Posts: 8

Great ideas, but I don't see anything on the capper that's adjustable. There are no screws, everything is riveted together, including the bell.

 
Reply With Quote
Old 01-26-2012, 03:45 AM   #17
beninan
Recipes 
 
Mar 2010
Maine
Posts: 998
Liked 17 Times on 16 Posts


I have that Brev capper and the Red Baron capper. The metal frame capper has a plastic insert inside the bell that's held in place by a rivet, so the bell is not adjustable. The rivet is the thing causing the dimple. The Red Baron is hit or miss from what I have seen, and it depends on the bottle as well as force applied to the capper. Adjusting the bell on the Red Baron did not help for me, because it has a ridge around the inner hole of the bell where the magnet slides through, and that is what is causing the dimple on my bottles. Like I said, with the Red Baron capper some bottles have a very light dimple but most don't.
__________________
"Stop giving me credit for those stupid quotes! For that last time it wasn't me! STFU NOOB!" <-- Benjamin Franklin

 
Reply With Quote
Old 01-26-2012, 07:36 PM   #18
krenshaw
HBT_LIFETIMESUPPORTER.png
 
krenshaw's Avatar
Recipes 
 
Dec 2010
Lancaster, PA
Posts: 1,129
Liked 54 Times on 49 Posts


Quote:
Originally Posted by smokinghole View Post
I use the Super Agata Bench Capper. I used a wing capper for like 2-3 batches and thought it sucked. I would never go back from a bench capper. I've sprayed it with pam to lube it up.
+1 to the super agata bench capper.. its very easy to adjust to each bottle, especially if they are different heights.. i'm speaking for SWMBO because i'm the one that fills, she's the one that caps, but she loves it
__________________
~ A fine beer may be judged with only one sip, but it's better to be thoroughly sure.

DOWN THE HATCH BREWING
Stainless Hop Spider | Wooden Brew Rig | Dual Hinge Keezer Build

Primaries: oxy :-(
Keg 1: Brown Ale | Keg 2: Porter | Keg 3: Belgian Wit
Bottles: lots full and even more empty

 
Reply With Quote
Old 01-26-2012, 08:03 PM   #19
ao125
Recipes 
 
Oct 2010
Alexandria, VA
Posts: 491
Liked 8 Times on 8 Posts


I have a Red Baron that I got with an Ale Pale kit, years ago... it leaves dimples if I crank down too hard, otherwise it's fine for what it is.

It does suck though, for 1L bottles. I can't really use it due to the shape of my bottles. I managed to get one capped before I gave up and just went to the optional rubber flip-tops for the bottles.

Next time around, I'm going to get a bench capper. They look like they're worth the $36.
http://www.ritebrew.com/product-p/863547.htm
__________________

Kegged (1/3): Single-Hop NZ Rakau Oatmeal IPA
Kegged (2/3): Smoked Peruvian Pepper Cider
Kegged (3/3): (empty)

 
Reply With Quote
Old 01-26-2012, 11:27 PM   #20
malkore
 
malkore's Avatar
Recipes 
 
Jun 2007
Nebraska
Posts: 6,922
Liked 37 Times on 35 Posts


Quote:
Originally Posted by Tom2011 View Post
You could try to lube the bell with Vaseline or something and cap harder to break in the bell.
Or ask SWMBO to lube your bell...its always more fun with a friend!
__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Capper that doesn't put a "dimple" on the cap willjschmidt Bottling/Kegging 0 01-24-2012 07:46 PM
Uh oh. Just searched "Bottle condition growler" Jebu1788 Bottling/Kegging 6 06-23-2011 04:01 AM
does bottle conditioning have a "flavor"? homebrewedipa Bottling/Kegging 6 03-16-2011 05:11 PM
"Real Ale" in a Wine Bottle? Sky7 Bottling/Kegging 10 01-28-2011 05:12 PM
Bottling beer in 2 liter "Diet Coke" or "Diet Pepsi" bottles theguy Bottling/Kegging 5 06-24-2009 06:25 PM


Forum Jump