120V Diagram request - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > 120V Diagram request

Reply
 
Thread Tools
Old 01-24-2012, 02:11 PM   #1
DownRightAft
Recipes 
 
Feb 2009
Posts: 22


I have been planning my 120V build for a while, and would appreciate some help in the wiring diagram. I have searched the forum, but haven't been able to find a diagram that appeared to fit.

I am building a small brewery, using a single 2352 PID, single 1500w 120v element, and a single 809 march pump.

I would like to use on/off selector switches, 1 for the PID, 1 for the element, and 1 for the pump, and an E-stop.

I hope PJ, or someone with similar knowledge is able to help me out. I've been reading other builds, and researching electrical wiring in general. I have a good idea about how to wire it. But, I would feel much more comfortable seeing a diagram written by someone with more experience than me.

Thanks ahead of time!

 
Reply With Quote
Old 01-24-2012, 04:10 PM   #2
P-J
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Mar 2010
Charlotte, NC
Posts: 3,336
Liked 301 Times on 235 Posts


Click on the image to see a full scale diagram printable on Tabloid paper (11" x 17")


 
Reply With Quote
Old 01-24-2012, 04:26 PM   #3
DownRightAft
Recipes 
 
Feb 2009
Posts: 22

Thanks PJ!

 
Reply With Quote
Old 01-24-2012, 06:19 PM   #4
boswell
 
boswell's Avatar
Recipes 
 
Mar 2010
philadelphia
Posts: 377
Liked 13 Times on 11 Posts


So cool someone else asked, needed this!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
PJ wiring diagram nspaldi0 Electric Brewing 12 09-18-2012 11:56 PM
Help with P-J diagram mizzourah Electric Brewing 1 01-13-2012 07:53 PM
Help with eBIAB diagram (yes another...) Gabrew Electric Brewing 0 11-29-2011 01:01 AM
Diagram help Backporchbrewery Electric Brewing 3 09-24-2011 03:01 AM
Kal's diagram? JohnnyGunn Electric Brewing 2 07-12-2011 03:07 AM


Forum Jump