Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns, & Hot Liquor Tanks > BIAB Bag Size
Reply
 
Thread Tools
Old 01-23-2012, 11:02 PM   #1
steve_lohmann
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Middletown, CT
Posts: 4
Default BIAB Bag Size

I'm about to make a bag for brewing in a bag in my keggle, but am unsure on how large to make it.

I've seen that the top circumference should be 15% larger than the kettle. Should I use the circumference of the keg or should I use the circumference of the hole? I'm afraid that the bag might get stuck if I use the keg circumference, but think I also don't want to make the bag too small. The diameter of the keg is 15" and the hole is 11".

Please advise.


steve_lohmann is offline
 
Reply With Quote
Old 01-23-2012, 11:16 PM   #2
Haputanlas
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Austin, TX
Posts: 2,975
Liked 57 Times on 56 Posts
Likes Given: 38

Default

It's not a big deal if it's too large (Unless we're talking ridiculously large). I'd use the circumference of the Keg since that will make it larger.


__________________
"There is no strong beer, only weak men"
"Pretty women make us BUY beer, ugly women make us DRINK beer" - Al Bundy
"Give a man a beer, he'll drink for a day. Teach a man to brew, he'll be drunk for the rest of his life."

Primary: Viking Metal, Berliner Weisse
Kegged: Oaked English Mild, Modus Hoperandi
Bottled: None
Notable Empties: Oaked Black IIPA, BBK I, Red IIPA, Burning Bush, Apophis "The Destroyer", Vanilla Porter
On-Deck: Hobbit Ale, The Titan BW, Ale of Olympus
Haputanlas is offline
 
Reply With Quote
Old 01-23-2012, 11:20 PM   #3
gunner65
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Lexington, KY
Posts: 844
Liked 16 Times on 13 Posts
Likes Given: 1

Default

Nothing set in stone but a good rule of thumb is that you should be able to fit your brew kettle inside of it.
__________________
Single Vessel BIAB is all I need....Until we figure out the no vessel technique.
gunner65 is offline
 
Reply With Quote
Old 01-24-2012, 12:16 AM   #4
steve_lohmann
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Middletown, CT
Posts: 4
Default

I'll go with using the keg circumference and assume the wet grains will be squishable enough that they won't get stuck under the lip.
steve_lohmann is offline
 
Reply With Quote
Old 01-24-2012, 12:55 AM   #5
smokewater
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Winston Salem, North Carolina
Posts: 196
Liked 3 Times on 3 Posts
Likes Given: 1

Default

I have seen a design somewhere online where the bag is tapered inward a couple of inches towards the bottom . That way you get a cone type shape when you pull the bag rather than a wider two corner bottom.


smokewater is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keggle BIAB Bag Prymal Kettles, Mash Tuns, & Hot Liquor Tanks 13 11-17-2014 10:13 PM
BIAB Keggle Insulation cyberwollf Kettles, Mash Tuns, & Hot Liquor Tanks 14 01-07-2012 07:47 PM
All-In-One BIAB Brew Stand itzkramer Brew Stands 17 08-19-2011 05:45 AM
BIAB Bag Fabric bytemyfoot Brew Stands 1 05-23-2010 04:47 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS