1-Gallon Glass Carboys - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > 1-Gallon Glass Carboys

Reply
 
Thread Tools
Old 01-15-2012, 03:00 PM   #1
JeffoC6
Recipes 
 
Jan 2012
Stewartsville, NJ
Posts: 1,053
Liked 62 Times on 30 Posts



I'm very new to this hobby and am currently 3 days into my primary fermentation. I have the Brooklyn Brew Shop kit, so I only have one 1-gallon carboy. I'd very much like to graduate to a 5-gallon, but I simply don't have the room right now, as I live in a condo that's currently on the market to be sold (minimal is key when selling your place). So with that said, I don't have the luxury of having a set-up of 5 gallon buckets, etc. So my plan is to invest in maybe 2 or 3 additional 1-gallon carboys so I can at least get a few batches going at staggered times. What I'm concerned about though is cleaning these suckers. Is it really that bad? I've found a few websites that give you cleaning tips (like putting rice and vinegar in the carboy and shaking), or using a long wire brush, etc. Am I going to have a hell of a time cleaning a 1-gallon glass carboy?
__________________
Pap Don Brewers
Planned:
Prim #1: Bronco Tamp
Prim #2:
Prim #3:
Bottled:

 
Reply With Quote
Old 01-15-2012, 03:08 PM   #2
OpenContainer
 
OpenContainer's Avatar
Recipes 
 
Dec 2011
Jefferson City, MO
Posts: 337
Liked 21 Times on 20 Posts


First - Don't buy any 1 gallon jugs. Buy the 4 Liter Carlos Rossi wines form the grocery store and drink them. They're not bad if you mix them with Sprite.

Then buy a bottle brush from your LHBS, or order one online. DON'T use a wire brush.

 
Reply With Quote
Old 01-15-2012, 03:19 PM   #3
Calichusetts
 
Calichusetts's Avatar
Recipes 
 
Nov 2011
Plymouth, MA
Posts: 3,014
Liked 500 Times on 300 Posts


I have 6 one-gallon jugs and recommend them, purchase some 38mm screw caps with a hole too (the ones that come with the brooklyn brew shop)

I got two batches bubbling away right now, its great because I always have enough for secondaries and new batches and there is never a bottleneck.

Most brushes won't fit the one gallon. Just add a teaspoon of oxyclean as soon as you empty them and fill to the brim. I do this twice over 3 hours and they are spotless, no elbow grease required.

 
Reply With Quote
Old 01-15-2012, 03:42 PM   #4
djfriesen
Recipes 
 
Sep 2011
Posts: 1,189
Liked 26 Times on 24 Posts


If you can get your hands on a stand that holds them upside down, your life will be much easier. A quart or so of hot water and a pinch of Oxy, and you're golden. Most of the time the only thing I need to clean is the dried krausen ring around the neck. A bottle brush works fine, although it's a little more more work, and I don't see a reason not to use a wire brush. There may be a very valid reason, but I'm not aware of it.

 
Reply With Quote
Old 01-15-2012, 03:58 PM   #5
Rowdy
Recipes 
 
Nov 2009
Tampa, Florida
Posts: 460
Liked 12 Times on 12 Posts


they are actually quite easy to clean. rinse asap after racking from them if you let the stuff dry its harder. fill with hot water and some oxy clean and the regular beer bottle brush works pretty good on em.
__________________
Cruiscín Lán Grúdlann
In wine there is wisdom, In beer there is freedom, In water there is bacteria.

 
Reply With Quote
Old 01-15-2012, 04:07 PM   #6
JeffoC6
Recipes 
 
Jan 2012
Stewartsville, NJ
Posts: 1,053
Liked 62 Times on 30 Posts


Thank you all for the tips. I've decided that I'm going to purchase 2 additional 1 gallon glass carboys (read that Carlo Rossi bottles may not be able to handle the pressure of primary fermentation). I'm looking here for the carboys:
Carboys and Glass Jugs - Fermentation Equipment - Wine Equipment
I'm assuming I also need some rubber stoppers as well:
Rubber Stoppers - Drilled

Can anyone suggest what size rubber stoppers I need for the 1-gallon carboy?

I'm also getting 2 additional airlocks:
Airlock 3 piece type

Thank you all for your suggestions/help.
__________________
Pap Don Brewers
Planned:
Prim #1: Bronco Tamp
Prim #2:
Prim #3:
Bottled:

 
Reply With Quote
Old 01-15-2012, 04:21 PM   #7
mikeysab
HBT_SUPPORTER.png
 
mikeysab's Avatar
Recipes 
 
Aug 2009
staten island
Posts: 4,505
Liked 547 Times on 416 Posts


Pressure from primary fermentation? Are you fermenting with a cap on your jug? Any pressure will be release through the airlock. If you're CARBONATING in them, thats another story.
__________________
Quote:
Originally Posted by Yooper
We be in a big hurry for dope beer with much alcamahol and flavor, quality, balance, and aroma don't matter.
Mikeysab on untappd.

 
Reply With Quote
Old 01-15-2012, 04:27 PM   #8
Spring_Chicken
Recipes 
 
Nov 2010
Snohomish, WA
Posts: 217
Liked 5 Times on 5 Posts


Carlo Rossi jugs work great. I use a bottle brush to clean them. Just put a bend toward the bottom of the brush and voila! Mini carboy brush.

There should be NO pressure from fermentation. That's why you put the air lock on it.

 
Reply With Quote
Old 01-15-2012, 04:37 PM   #9
JeffoC6
Recipes 
 
Jan 2012
Stewartsville, NJ
Posts: 1,053
Liked 62 Times on 30 Posts


Sorry, you guys are right. No pressure during primary. And no, I will not be leaving it in the jugs during carbonation.
__________________
Pap Don Brewers
Planned:
Prim #1: Bronco Tamp
Prim #2:
Prim #3:
Bottled:

 
Reply With Quote
Old 01-15-2012, 08:05 PM   #10
Calichusetts
 
Calichusetts's Avatar
Recipes 
 
Nov 2011
Plymouth, MA
Posts: 3,014
Liked 500 Times on 300 Posts


Quote:
Originally Posted by JeffoC6 View Post
Can anyone suggest what size rubber stoppers I need for the 1-gallon carboy?
38mm screw caps with molded holes...they fit a 3-piece airlock perfectly and 5/16s tubing (the tube that comes with the BBS kit you have) they can not come off and are amazing...I bought small bungs but find them pointless when I know my caps can't come off:

38mm Plastic Screw Cap with Hole

Seriously, they are all you will ever need

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Used glass Carboys ? brewn4fun Beginners Beer Brewing Forum 6 08-11-2011 08:23 PM
wtb in glass carboys choffon Beginners Beer Brewing Forum 6 06-20-2011 09:43 PM
Use of Glass carboys ToastedPenguin Beginners Beer Brewing Forum 10 09-17-2010 09:35 PM
Glass Carboys vs Better Bottles? RadicalEd Beginners Beer Brewing Forum 18 07-01-2007 09:39 PM
Should Carboys always be glass? BoxerDog Beginners Beer Brewing Forum 5 01-11-2007 01:44 PM


Forum Jump