Help reading Hydrometer! - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Help reading Hydrometer!

Reply
 
Thread Tools
Old 01-15-2012, 01:21 AM   #1
roxy35
Recipes 
 
Jan 2012
hickory, nc
Posts: 109


Hello everyone,

I brewed my first beer 6 days ago and have learned a lot about the process, however I want to make sure I am reading my hydrometer correctly.

Just now I pulled the top off to take a reading since my instructions say my Hefeweizen should ferment from 5-10 days. Sooo, I sanitized everything very carefully, took my sample, dropped my hydrometer in the sample, and looked at my readings.

Below are pictures, but TO ME it looks like I have a gravity reading of 1.2 and an alcohol content of roughly 2.5%. Now, I'm not really sure where to go from here. My instructions do not indicate a final gravity rating, however it does say it should be 5.5% ABV. I'm reading this as "my gravity is high, which means there is more sugar that needs to ferment, which explains why the ABV is so low right now." Is this correct, or did I mess up somewhere?


I did taste the sample afterwards. Yum, it was good. It did a taste a little sweet though...

Thanks!


EDIT: I also wanted to add that this has been fermenting between 62-65 for the past 6 days, maybe up near 66-67 during the intense fermentation process after I pitched.


Click image for larger version

Name:	IMG_20120114_201047.jpg
Views:	1906
Size:	17.9 KB
ID:	43666   Click image for larger version

Name:	IMG_20120114_201008.jpg
Views:	2019
Size:	17.3 KB
ID:	43667  


 
Reply With Quote
Old 01-15-2012, 01:29 AM   #2
sudsmcgee
Recipes 
 
May 2010
Western Chicago Burbs, IL
Posts: 1,519
Liked 50 Times on 42 Posts


You're at 1.020, not 1.2 and it's most likely not done yet. What temperature is the beer at? FYI, most hydrometer measurements need to be adjusted down or up to their calibration temp.

I would try warming the beer up to closer to 68-70 and see if it starts fermenting again.



 
Reply With Quote
Old 01-15-2012, 01:31 AM   #3
arkowa
Recipes 
 
Jun 2010
Cincinnati
Posts: 85
Liked 1 Times on 1 Posts


Your reading is 1.020. The alcohol readings/ticks mean very little. It represents potential alcohol of an original gravity reading, not a final reading.

The easiest way to find your alcohol by volume is find the difference between your original gravity and final gravity. Multiply by 129. Or... Search for an online calculator. Other methods, if you did not get an OG, include weighing a known volume of your beer. I'm sure someone around here has the formula.

 
Reply With Quote
Old 01-15-2012, 01:32 AM   #4
dutchoven
HBT_SUPPORTER.png
 
dutchoven's Avatar
Recipes 
 
Mar 2011
SF Bay Area, California
Posts: 640
Liked 8 Times on 8 Posts


Yeah, still has a way to go ... Give it at least 14 days ... As for reading the hydrometer, you'll notice the liquid "curls" up on to the glass ... Read at the top of that "curl". A typical final gravity is 1.010 +/- 0.005.

 
Reply With Quote
Old 01-15-2012, 01:32 AM   #5
RM-MN
HBT_SUPPORTER.png
Recipes 
 
Nov 2010
Solway, MN
Posts: 9,358
Liked 1611 Times on 1281 Posts


Yes your hydrometer seems to show 1.020. No, you did not make 2.5% beer. The hydrometer reading that shows alcohol percentage shows what the potential alcohol left in the beer. You can't ferment this out with your ale yeast because it contains sugar that the yeast can't break down. Your beer is likely to be about 5% alcohol. If you had the original hydrometer reading (original gravity or OG) you can calculate the amount of alcohol produced.

Dang, I need to take a speed typing course.

 
Reply With Quote
Old 01-15-2012, 01:34 AM   #6
ajf
Senior Member
HBT_LIFETIMESUPPORTER.png
 
ajf's Avatar
Recipes 
 
Oct 2005
Long Island
Posts: 4,646
Liked 105 Times on 99 Posts


The 1.000 is 1.000
The 10, 20, 30 ... is 1.010, 1.020, 1.030 etc so your current gravity is about 1.020
Ignore the alcohol % scale. It doesn't mean anything. If you want to know the alcohol % (bu volume) use the formula (OG - FG) * 131. It isn't completely accurate, but it's pretty close.

Hope this helps,

-a.
__________________
There are only 10 types of people in this world. Those that understand binary, and those that don't.

 
Reply With Quote
Old 01-15-2012, 01:35 AM   #7
johnsma22
HBT_SUPPORTER.png
 
johnsma22's Avatar
Recipes 
 
Jun 2006
Taunton, MA
Posts: 1,963
Liked 78 Times on 59 Posts


Quote:
Originally Posted by sudsmcgee View Post
You're at 1.020, not 1.2 and it's most likely not done yet. What temperature is the beer at? FYI, most hydrometer measurements need to be adjusted down or up to their calibration temp.

I would try warming the beer up to closer to 68-70 and see if it starts fermenting again.
What he said. Does it look like the yeast are still active, or have they settled to the bottom? I would gently swirl the yeast back into suspension and move the fermenter to a warmer location and see if fermentation kicks back in.
__________________
Cheers,
John

 
Reply With Quote
Old 01-15-2012, 01:41 AM   #8
roxy35
Recipes 
 
Jan 2012
hickory, nc
Posts: 109

It does look like there is still a little bit of yeast still active (specks on material floating). Are you saying to stir up everything from the bottom again? I know it will re-settle, but I want to be sure.

I'm having trouble getting the temperature to raise. I have had trouble for a few days bc I wanted it around 65, but it settled in at 62-63. Would it be safe to set on or near a heat vent in our home? I'm thinking ON the vent might get it too hot but only NEAR it would not distribute it evenly.

I don't have a heating pad but do have a ceramic heater that I will using once my Ranco arrives to control in a freezer.

 
Reply With Quote
Old 01-15-2012, 01:44 AM   #9
pabloj13
Recipes 
 
Dec 2011
Durham, NC
Posts: 1,553
Liked 92 Times on 80 Posts


You might want to gently spin the hydrometer too since when it lays on the side of the tube like that it can affect the reading quite a bit.
__________________

Kegged Two Hearted, Dragonmead Final Absolution
Bottled Robust porter, Founder's Breakfast Stout, Ommegawd Hellepin, Ed Wort's Apfelwein
RIP Snake Dog IPA, Biermuncher's OktoberFAST, Falconer's Flight IPA, Two-Hearted clone (Culturing Bell's Yeast), Noberon wheat, Skeeter Pee using dry yeast, Smooth Oatmeal Stout


Simple and easy wort aeration - Harvest yeast from your blowoff - Homebrew Spicy Mustard

 
Reply With Quote
Old 01-15-2012, 01:46 AM   #10
sudsmcgee
Recipes 
 
May 2010
Western Chicago Burbs, IL
Posts: 1,519
Liked 50 Times on 42 Posts


You can put it near a heat vent and it will be fine. It takes a lot of heat to warm up 5 gals of beer.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hydrometer reading 0.85???? CrazyHomelessGuy Beginners Beer Brewing Forum 6 01-09-2011 11:43 PM
Hydrometer reading HELP KMKsuburbannoise Beginners Beer Brewing Forum 7 11-08-2010 01:28 AM
Too soon to take a Hydrometer reading? ohill1981 Beginners Beer Brewing Forum 13 12-11-2008 08:45 PM
very low hydrometer reading jeff_gordon24 Beginners Beer Brewing Forum 4 01-07-2007 04:09 AM
hydrometer reading prey Beginners Beer Brewing Forum 18 07-12-2006 12:01 AM


Forum Jump