How do you create a recipe? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Recipes/Ingredients > How do you create a recipe?

Reply
 
Thread Tools
Old 01-13-2012, 05:56 PM   #1
davidcr80
Recipes 
 
Nov 2011
phoenix, AZ
Posts: 33


I am trying to figure out if there are better methods and resources to help me create recipes:
Currently I am using hodge-podge info and sources for creating recipes (in 5 gal extract and partial grain batches). Most of the time I first pick and study a style using various sources and beers, second find a recipe or clone that comes close to what I want, then modify that recipe yet again because of personal preferences and/or because of ingredients available at my local HB supply store.

So, in light of my methods thus far (8 batches under my belt). What are other ways to go about creating a beer. For simplicity lets stick with having the style picked-out i.e. "I want to make a refreshing American Wheat, not too heavy or hoppy". so where do you point someone from there...(I am not necessarily looking for details on the "American Wheat", just an example for guidance in putting together recipe).



 
Reply With Quote
Old 01-13-2012, 06:03 PM   #2
gregpio85
Recipes 
 
Jan 2011
Chicago, IL
Posts: 195
Liked 3 Times on 3 Posts


Do you use the BJCP guidelines? They've been invaluable to me in getting started creating recipes.

BJCP 2008 Style Guidelines - Index

That's my first go to. It gives you commercial examples which you can get recipes for, then go from there.



 
Reply With Quote
Old 01-13-2012, 06:04 PM   #3
jetmac
HBT_SUPPORTER.png
 
jetmac's Avatar
Recipes 
 
Aug 2010
Mcdonough, Ga
Posts: 1,140
Liked 36 Times on 18 Posts


Designing Great beers


That book and BeerSmith

And this Malt Yield Table
__________________
Wayne Gretzky-"100% of the shots you don't take, don't go in

Revvy>>You shouldn't worry about ANYTHING, you didn't hurt the yeast, they know what they need to do, they want to eat all that sugar they are swimming around in. They want to pee alcohol and fart co2, it's their nature.

Bobby_M>>I flood the keg with CO2 for one minute with the lid off, rack the beer in to the bottom gently, seal it, flood it, vent it. If there's still O2 in there after that, F it.

 
Reply With Quote
Old 01-13-2012, 06:04 PM   #4
kcross13
Recipes 
 
Jan 2011
Key West, Florida
Posts: 234
Liked 3 Times on 2 Posts


On this forum there are plenty of recipes, as well as just googling one. I have a few guide books with recipes. Basically you have a base malt and build from that with other malt towards style. American wheat can be all wheat or part wheat part barley. Pick you hops, and yeast and go. I order my stuff on line and brewmasterswarehouse.com has a free building guide to help you and you can just click order recipe and it all gets shipped.

 
Reply With Quote
Old 01-13-2012, 06:05 PM   #5
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,033
Liked 7615 Times on 5359 Posts


I think about what I want and the style I'm thinking of. Then, I consider what it is about that style I want or don't like. My husband is great at this- he'll taste a beer and say, "Well, I like the color and the amount of bitterness but I wish it had maltier feel and a bit more body, and I'd like citrusy hops in the finish." Or he'll say, "I'd really like a lighter feeling pale ale, with earthy hops" and from there I start thinking about what will get me there.

I do look at the BJCP guidelines, to see what sort of IBUs and OG would get me there, and start with the base malt. From there, I add the specialty grains and hops.

Designing Great Beers by Ray Daniels was a book that really helped me with designing recipes, as even if I knew I wanted a "warmer" flavor, I didn't know what malts would give that to me. With practice, I rarely refer to the book, at least with the styles I'm most familar with. But if I was designing a dopplebock, that'd be the first place I'd look! I also look at recipes in our recipe database to see what they have in common. If most bock recipes have Munich malt in them, I would probably use Munich malt in my recipe as well.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 01-13-2012, 06:06 PM   #6

All of your styles are going to begin with a basic base malt. Belgian, UK, German, American, etc. From there, you just need to decide what specialty malts will give you the color and flavor that belongs with that style. You'll pick this up over time.

I'd highly suggest picking up "Designing Great Beers". It's a great book, and I still pull it off the shelf from time to time. It goes into detail about ingredients, mash temps, fermentation temps, hops, yeast, etc. It also gives you a great backround on most of the styles you'll be brewing.
__________________
He who drinks beer sleeps well. He who sleeps well cannot sin. He who does not sin goes to heaven.

Another HERMS rig...

 
Reply With Quote
Old 01-13-2012, 06:07 PM   #7
kh54s10
HBT_SUPPORTER.png
 
kh54s10's Avatar
Recipes 
 
Aug 2011
Tiverton, Rhode Island
Posts: 10,362
Liked 1512 Times on 1244 Posts


I basically do what you have been doing. I decide on a style I want to do, then I look at a lot of recipes. Then I try to determine which ingredients I want to use. I plug them into Beer Calculus on Hopville.com.

I have done 2 partial mash recipes. One was great and one was very good.

I have also done an all grain that is in primary now.

Next up is an all grain version of the partial mash that I thought was [I]only[I] very good. It is a Pale Ale.

 
Reply With Quote
Old 01-13-2012, 06:22 PM   #8
DannPM
Recipes 
 
Jan 2011
Pittsburg, KS
Posts: 1,867
Liked 23 Times on 20 Posts


It's like asking an artist how to create a masterpiece, it just happens...
__________________
Time to have some fun

 
Reply With Quote
Old 01-13-2012, 08:55 PM   #9
Bithead
Recipes 
 
Apr 2010
Southern, NJ
Posts: 751
Liked 36 Times on 30 Posts


Randy Mosher is on the most recent BeerSmith podcast talking about designing beer. It's a pretty good listen. Designing Beer with Randy Mosher - BeerSmith Podcast 30 - YouTube

 
Reply With Quote
Old 01-13-2012, 09:48 PM   #10
acidrain23
Recipes 
 
Nov 2011
Chicago, IL
Posts: 354
Liked 13 Times on 12 Posts


I'm certainly no expert, but I would say the two biggest factors (this applies to cooking as well) are 1) familiarity with your ingredients (taste your malts, smell the hops, etc. etc.) and 2) using your imagination. Picture exactly what you want in your mind's eye (imagine the maltiness, the mouthfeel, the color of your brew, imagine it intensely...), then pick ingredients to best acheive those effects. Also, look at clone recipes of commercial examples of what you are trying to go for. You can 'steal' just the hop regimen, malt profile, or figure out which yeast to use. Use a brewing calculator to dial in ABV's and IBU's. Good luck!



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Create your own recipe? moneycoach Recipes/Ingredients 6 03-02-2011 02:42 PM
Create-Your-Own Recipe! Swaves Recipes/Ingredients 6 10-09-2010 01:25 PM
Help me create a recipe - (extract IPA) Matt_D Recipes/Ingredients 14 07-17-2008 06:29 PM
Help create recipe db TxBrew Recipes/Ingredients 9 05-10-2006 02:17 AM
How to create a recipe? dirtygreek Recipes/Ingredients 5 04-29-2005 04:24 AM


Forum Jump