Pitching a yeast starter - the whole thing or just the slurry? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Pitching a yeast starter - the whole thing or just the slurry?

Thread Tools
Old 01-11-2012, 04:08 PM   #1
Nov 2007
Posts: 146
Liked 5 Times on 5 Posts

I want to try using a liquid yeast (instead of the dried yeast I have used so far), and I want to utilize a yeast starter. Most of my literature talks about using either a 1 quart or a half gallon starter (weak malt solution with some yeast nutrients) 3 to 5 days ahead of brew day. Here's my question - when I pitch the starter into my wort, do I dump the whole thing in, or decant much of the liquid then pitch the slurry?

Reply With Quote
Old 01-11-2012, 04:26 PM   #2
May 2011
Waynesboro, PA
Posts: 545
Liked 12 Times on 12 Posts

Both work, typically people like to either time their starters to be at high krausen if they are pitching the whole thing or fridge decant and pitch the slurry. When I pitch at high krausen I don't use my stir plate for the last step (I make my yeast from slants so I step them up several times) and just shake a little to avoid pouring a whole heap of heavily oxidized wort into my main wort. Other wise a fridge and decant just the slurry.

Note if you are using yeast from a vial it is very hard to approximate when the starter will be at high krausen. Also if you fridge your yeast to help it drop from suspension to allow you to decant you have to allow different time for different yeast based of how keen it is to flock, ie if you use a hefe yeast you want to allow several days but WLP001 drops out so well 24hrs is enough time.


Reply With Quote
Old 01-11-2012, 04:28 PM   #3
Post Hoc Ergo Propter Hoc
Revvy's Avatar
Dec 2007
"Detroitish" Michigan
Posts: 40,921
Liked 3198 Times on 1886 Posts

It's really up to you, some decant, or some just swirl it all in. It like so many things is really a matter of choice, more than anything else.

One factor to consider is whether or not the "starter beer," the liguid on top smells sour or not. Often, especially in the summer it may sour in only a few hours. Some folks add a hop pellet as a preservative/preventative measure. The couple of ounces of sour beer wont really affect the taste of your finished product (unless maybe you were brewing an extremely light tasting beer.) It's really up to you.

Another factor is whether or not the yeast is a low flocculating yeast and there may be a lot still in suspension. The "beer" will be cloudy rather than clear-ish. If it's a witbier or hefe yeast for example it might be better just to swirl and pour it all in, you'll get the max number of yeast cells that way.

My starter flask is huge and often I will build up a starter over a few days and end up with 1 1/2 to 2 quarts of "beer" in it. If the yeast has pretty much flocculated I will, if I have time cold crash it, but even if I don't I will carefully pour off all but about 2 cups of the liquid, then swirl the remainder to re-suspend the yeast and dump it in my fermenter.
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Reply With Quote
Old 01-11-2012, 04:30 PM   #4
wolverinebrewer's Avatar
Jan 2011
Oxford, MI
Posts: 599
Liked 13 Times on 9 Posts

First off, you should go to M. Malty yeast calculator and input all of the info needed for the beer you are making. Make sure you input the production date of the yeast pack. Click on the "liquid yeast" tab to determine how many yeast cells you need and how big of a starter to do.
I always give myself 18-24 hours from the time the starter finishes to the time of pitching to chill the starter and decant. It sounds like you are also giving yourself adequate time so I would never pitch any of the starter wort. My reason is that 1 liter of crappy 1.040 starter wort mixed in with 20 liters of a carefully designed recipe is a 5% dilution which can change the beer you are making IMO. It might seem anal, but I try to make the best beer by implementing the best methods without cutting corners.
I currently have a starter on the stir plate that I started last night. I plan on turning it off today at 5:00, chilling overnight, decanting and pitching about 1:00 tomorrow.
All I ask is three beers apiece for each of my co-workers...I think a man workin outdoors, feels more like a man if he can have a bottle of suds.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
First Starter from yeast slurry Hopsaholic Fermentation & Yeast 2 12-29-2011 03:49 PM
Yeast Slurry viability without a starter? hughes_brews Fermentation & Yeast 2 11-01-2011 06:19 PM
Pitching into Cold Starter Wort, or Why a Broken Thermometer is a Bad Thing aehernandez Fermentation & Yeast 5 08-21-2011 10:29 PM
Unwashed yeast slurry pitching rate? Phunhog Fermentation & Yeast 7 03-08-2011 06:35 PM
Yeast Starter - pitching the whole thing dmbeck2 Fermentation & Yeast 4 09-26-2010 07:48 AM

Forum Jump