Keg cleaning - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Keg cleaning

Reply
 
Thread Tools
Old 01-10-2012, 09:14 PM   #1
bowhuntah
Registered User
Recipes 
 
Jun 2011
Windham, Maine
Posts: 111
Liked 2 Times on 1 Posts



I have a couple of sanke kegs that I'm going to use as fermenters. I've removed the stem and I'm going to clean them with oxiclean. I've had the kegs since 1997 so I'm sure they need a good cleaning. I put a couple of gallons of solution in and sloshed it around. To get the sides I put the keg on its side and rolled it a few times. Is this enough to get it clean? How long should I soak it?

 
Reply With Quote
Old 01-10-2012, 10:13 PM   #2
smoa
Recipes 
 
Jun 2008
Posts: 83
Liked 2 Times on 2 Posts


I would put a couple scoops of oxyclean in the keg and then fill it with the hotest water my hot water tank can produce. I would then let it sit until the water cooled (maybe 48 hours) and then dump it out. Then see how bad it is from there.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keg cleaning BeerBrods22 Equipment/Sanitation 24 04-13-2016 12:55 PM
Cleaning a keg tap aaronc5150 Equipment/Sanitation 3 01-21-2011 02:09 AM
Cleaning Used Corny Kegs with gun cleaning brushes? akthor Equipment/Sanitation 8 09-01-2010 12:26 PM
Cleaning with BKF sphericalcamel Equipment/Sanitation 3 07-13-2007 09:29 PM
Cleaning a CFC davidkrau Equipment/Sanitation 1 11-29-2006 04:34 PM


Forum Jump