Braided Hose - Page 2 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Braided Hose

Reply
 
Thread Tools
Old 05-09-2007, 07:55 PM   #11
Drunkensatyr
 
Drunkensatyr's Avatar
Recipes 
 
Apr 2007
Posts: 1,997
Liked 17 Times on 13 Posts


Takes about 2 min. All just depends on if you can get it loose enough to start moving. Don't get frustrated if it doesn't move the first few tries.



 
Reply With Quote
Old 05-09-2007, 08:11 PM   #12
Willsellout
 
Willsellout's Avatar
Recipes 
 
Jun 2006
Oregon coast
Posts: 913

It takes me about a minute. I cut both ends. Shove it backwards to expose the tubing. Then grab the tubing with pliers and pull while I push the braid and it comes right off.



Dan
__________________
Disgrunt-Aled Brewery
Primary One-empty
Primary Two-Empty
Secondary One-Empty
Secondary Two-Empty

On Tap: Hobgoblin, Coffee Stout
Bottled: Arrogant Bastard clone, Summit IPA, Apfelwein

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Braided supply hose or copper John Long All Grain & Partial Mash Brewing 38 08-19-2009 11:07 PM
Stainless Braided hose issue BubbaK All Grain & Partial Mash Brewing 9 08-06-2009 10:30 PM
Braided hose or Manifold? Which is better? Beavdowg All Grain & Partial Mash Brewing 45 05-25-2009 05:18 PM
SS braided hose abracadabra All Grain & Partial Mash Brewing 19 01-31-2007 03:59 PM
Stainless Braided hose covers Truble Equipment/Sanitation 10 09-16-2006 06:45 AM


Forum Jump