force carbing: psi & temps - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > force carbing: psi & temps
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 01-08-2012, 11:34 PM   #1
MKEbrew
Recipes 
 
Dec 2009
Milwaukee, Wisconsin
Posts: 100


What is the "best" end to work on for carbonating in a keg? The first few times I Kegged, I carb'd at around 41* in the fridge mainly because my regulator was messed up & didn't go past about 12.

Now that I've replaced it, I'm wondering if its more beneficial to carb at one temp or another - or does it not make a difference at all as long its the right psi for the temp.


__________________
Mark

 
Reply With Quote
Old 01-08-2012, 11:44 PM   #2
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 68,515
Liked 7368 Times on 5208 Posts


Quote:
Originally Posted by MKEbrew View Post
What is the "best" end to work on for carbonating in a keg? The first few times I Kegged, I carb'd at around 41* in the fridge mainly because my regulator was messed up & didn't go past about 12.

Now that I've replaced it, I'm wondering if its more beneficial to carb at one temp or another - or does it not make a difference at all as long its the right psi for the temp.
The temperature doesn't matter, as long as you have the regulator set for the correct psi for that temp.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 01-08-2012, 11:52 PM   #3
MKEbrew
Recipes 
 
Dec 2009
Milwaukee, Wisconsin
Posts: 100

What I expected.

Thanks!
__________________
Mark

 
Reply With Quote
Reply
Thread Tools



Forum Jump