Dual temp zone keezer - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Dual temp zone keezer

Thread Tools
Old 01-07-2012, 06:56 AM   #1
Sep 2011
stockton, ca
Posts: 30
Liked 1 Times on 1 Posts

I am planning on building a keezer and was wondering if anybody has put a insulated "wall" in the freezer to create a warmer / cooler side for different style of beers. I ask because i noticed when i had a freezer in the past the side with the ( moter box ) stayed a bit warmer.

Reply With Quote
Old 01-07-2012, 07:49 AM   #2
Aug 2008
Portland OR
Posts: 5,387
Liked 63 Times on 59 Posts

Never done it but I've looked at this one many times and considered it.

Reply With Quote
Old 07-23-2016, 05:17 PM   #3
Jul 2016
Posts: 6

I know it's 4 years later, but here's what i'm doing http://www.homebrewtalk.com/showthre...09#post7638609 and the kickstarter project is here https://www.kickstarter.com/projects...dge-controller. This can be applied to the keezer configuration you are talking about, though i've not actually tested it in that configuration. The heat swap fans would be installed in the insulated wall that you would fabricate. If the project is funded, i might actually buy a chest freezer and try the system out on it.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer Temp Control borovy3488 Bottling/Kegging 5 01-06-2012 03:31 PM
Keezer temp question BA_from_GA Bottling/Kegging 5 05-09-2011 08:50 PM
keezer temp BLM Bottling/Kegging 1 07-08-2010 02:44 AM
Temp Controller for Keezer Grimm Bottling/Kegging 4 05-21-2010 06:03 PM
Dual temp for keg vs. Time ?? MNBugeater Bottling/Kegging 1 02-13-2006 02:34 AM

Forum Jump