Separate Mash Day & Boil Day? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Separate Mash Day & Boil Day?
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 01-06-2012, 08:40 PM   #1
JesseL
Recipes 
 
Jul 2010
Oakland, CA
Posts: 60


I'm a recent and total convert to AG, but as a father of 3-year old twins with a full-time job (and a one hour commute each way) I'm having a hard time finding the 5-6 consecutive hours in my schedule for a brew day. I'm considering breaking up the process, ie. conducting the mash, sparge, and lauter the night before and doing the boil the next day. Is there any reason why I can't let the fresh wort sit overnight?



 
Reply With Quote
Old 01-06-2012, 08:43 PM   #2
maida7
Recipes 
 
Nov 2009
Asheville, NC
Posts: 2,827
Liked 48 Times on 41 Posts


I think you'd need to bring it to a boil to stop conversion and also kill any lactic bacteria. Why not just do an extract brew?



 
Reply With Quote
Old 01-06-2012, 08:51 PM   #3
RM-MN
HBT_SUPPORTER.png
Recipes 
 
Nov 2010
Solway, MN
Posts: 9,292
Liked 1585 Times on 1259 Posts


The reasons I can think of are wild yeast, mold and bacteria.

 
Reply With Quote
Old 01-06-2012, 08:58 PM   #4
JesseL
Recipes 
 
Jul 2010
Oakland, CA
Posts: 60

A clarification: I'm thinking of making the wort on day 1, and then boiling on day 2. The wort will sit overnight pre-boil, so the boil on the following day should kill off any hitchhikers.

Quote:
Originally Posted by maida7 View Post
I think you'd need to bring it to a boil to stop conversion and also kill any lactic bacteria. Why not just do an extract brew?
I considered this, but what I love about all-grain is the greater control over the final product, the reduction in cost, and the deeper involvement in the entire brewing process. It also opens up a whole new realm of brewing geekitude that isn't available with extract brewing. For these reasons, I'd rather find a way to accommodate AG brewing than go back to extract.

 
Reply With Quote
Old 01-06-2012, 08:59 PM   #5
OG2620
Recipes 
 
Jan 2008
Monmouth, Maine
Posts: 254
Liked 9 Times on 8 Posts


I did that the other day as it was too cold to get a boil going. So, I covered the wort in the kettle and continued on with the boil on the next day when it was warmer. That brew is currently fermenting so I can't tell you how it turned out, but i'll update when I find out. FWIW, the hydro sample tasted pretty normal.

 
Reply With Quote
Old 01-06-2012, 09:03 PM   #6
troub
Recipes 
 
Dec 2010
St. Louis, MO
Posts: 97
Liked 5 Times on 4 Posts


Quote:
Originally Posted by RM-MN View Post
The reasons I can think of are wild yeast, mold and bacteria.
This is true, but the idea is that those would be taken care of in the boil. The big problem, I think, is that it might start to sour or take other unpleasant or unpredictable characteristics overnight. The grain in the mash is going to be COVERED in lactobacillus at the least, so it's not an issue of "if I seal it up nothing can get in to infect it." It's already there, from the grain itself. Actually, I've heard that people sometimes let the mash sit overnight on purpose when they want to take a "shortcut" of sorts to making a sour beer. The mash will sour overnight, then the beer will have a sour tang immediately after a normal brewing and fermentation, rather than the typically longer and maybe riskier aging/souring process from pitching the bugs into a "healthy" wort/beer (if you're souring the mash, once it gets about where you want it via pH or taste measurement, the boil stops all further souring).

Anyway, don't do it unless you like sours.

EDIT: by "let the mash sit overnight", I'm not sure if they actually leave it in the tun all night, or if they go ahead an sparge and let the wort sour, or if it matters. I assume they let it sit in the tun, to maximize contact between the wort and the bacteria, but even if you sparged it out into a kettle you're rinsing some bacteria into there along with the sugar, so while the effect might be less, it's still a huge unpredictable factor.

2
People Like This 
Reply With Quote
Old 01-06-2012, 09:18 PM   #7
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 68,507
Liked 7368 Times on 5208 Posts


Right- the problem isn't that the nasties are killed in the boil the next day, it's that you will have a sour mash before the next day. Boiling it will keep it from getting more sour, but not counteracting the sourness from sitting out overnight (or even in the fridge as it would take a long long time to go from mash temp to fridge temps).

Have you considered an overnight mash? If you use a cooler for an MLT, that would probably work pretty well. Maybe mash in at 10 PM and sparge in the morning and then boil. I know a few others have done it and like it.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 01-06-2012, 09:19 PM   #8
BrewMU
Recipes 
 
Oct 2011
Columbia, MO
Posts: 516
Liked 7 Times on 7 Posts


I can't see what would be wrong with it. It's safer than boiling THEN letting your wort sit, which is pretty common practice. You can take advantage of the time to get a yeast starter ready. It's hard to imagine wild yeast/bacteria doing damage that would survive boiling and hopping after only 24 hours.

 
Reply With Quote
Old 01-06-2012, 09:27 PM   #9
JesseL
Recipes 
 
Jul 2010
Oakland, CA
Posts: 60

Quote:
Originally Posted by troub View Post
The big problem, I think, is that it might start to sour or take other unpleasant or unpredictable characteristics overnight. The grain in the mash is going to be COVERED in lactobacillus at the least, so it's not an issue of "if I seal it up nothing can get in to infect it." It's already there, from the grain itself.
Ah, I wasn't aware of that. I found a thread on a related topic that mentioned bringing the wort to 200 before letting it sit overnight, as that would kill off the lactobacillus and reduce the souring. What do you think?

 
Reply With Quote
Old 01-06-2012, 09:29 PM   #10
maida7
Recipes 
 
Nov 2009
Asheville, NC
Posts: 2,827
Liked 48 Times on 41 Posts


Quote:
Originally Posted by JesseL View Post
so the boil on the following day should kill off any hitchhikers.

I'd rather find a way to accommodate AG brewing than go back to extract.
The "hitchhikers" would make your wort sour overnight. Best to bring it to a boil before you let it sit overnight.

Extract ain't that bad. Great beer is made in fermentation. IMHO making wort is not as big a deal as everybody makes it out to be. But it's your hobby so do whacha want.

FYI, I'm a single dad with 3 kids, full time job, etc... I brew 10 gallon batches to save time.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Steeping Specialty Grains Separate from the Mash? (AG) IPA4ME All Grain & Partial Mash Brewing 11 10-18-2012 04:30 PM
Mash and boil now, boil later. ernestmyname All Grain & Partial Mash Brewing 3 12-12-2011 01:34 AM
why separate liquor from mash? BOBTHEukBREWER All Grain & Partial Mash Brewing 8 09-14-2008 12:15 AM
First AG- mash & Boil volume vs hop boil quickerNu All Grain & Partial Mash Brewing 12 06-20-2008 02:36 PM
AG questions with 2 separate boils thedaler All Grain & Partial Mash Brewing 11 02-16-2007 07:11 PM


Forum Jump