Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Keezer Questions...
Reply
 
Thread Tools
Old 01-02-2012, 06:59 PM   #1
flyfishnc
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Posts: 112
Default Keezer Questions...

So, I'm about to venture down the keezer road and I have a few questions... I have my kegs, freezer, and temperature controller.

1. What is the desired height and depth of the coffin? I know it needs to be tall enough to support whatever glass I fill up, but is there any other considerations?
2. I see where the tops of these things can be pretty heavy. Does the entire thing rest on the freezer's seal or the side walls of the wooden cabinet?
3. How do you all attach the top to the freezer's lid? I've seen T-nuts, washers, etc...
4. CO2 tank... inside or out? Is there an advantage either way? Currently, mine is in the beer fridge w/ my kegs. My thoughts were to put it behind (or hide it outside) of the keezer and pipe in the gas to a manifold.
5. If the CO2 is outside, do you drill through the wall of the freezer or run the line through a collar?

Thanks,
Eric


flyfishnc is offline
 
Reply With Quote
Old 01-02-2012, 10:53 PM   #2
lutherslagers
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Marshall, MI
Posts: 204
Liked 4 Times on 4 Posts
Likes Given: 5

Default

I did not build a coffin style keezer, just a regular one. I can answer questions 3, 4 & 5 for you.

3. I just reused the screws that held the freezer lid hinges to the back of the freezer. But they now screw into the keezer collar.

4. I put my inside, mostly for asthetics. The downside of inside your keezer is that your regulator reading can be off in the cold temps.

5. If you do put the CO2 tank outside you want to drill through the collar.


Click image for larger version

Name:	keezer.jpg
Views:	3192
Size:	57.1 KB
ID:	42296  
lutherslagers is offline
 
Reply With Quote
Old 01-02-2012, 10:54 PM   #3
lutherslagers
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Marshall, MI
Posts: 204
Liked 4 Times on 4 Posts
Likes Given: 5

Default

I thought I'd include an inside photo too...
Click image for larger version

Name:	keezer_inside.jpg
Views:	853
Size:	55.2 KB
ID:	42297  
lutherslagers is offline
 
Reply With Quote
Old 01-03-2012, 02:51 PM   #4
Jester369
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Jester369's Avatar
Recipes 
 
Join Date: Jan 2007
Location: Vermont
Posts: 1,967
Liked 150 Times on 110 Posts
Likes Given: 3

Default

Quote:
Originally Posted by flyfishnc View Post
1. What is the desired height and depth of the coffin? I know it needs to be tall enough to support whatever glass I fill up, but is there any other considerations?
2. I see where the tops of these things can be pretty heavy. Does the entire thing rest on the freezer's seal or the side walls of the wooden cabinet?
3. How do you all attach the top to the freezer's lid? I've seen T-nuts, washers, etc...
4. CO2 tank... inside or out? Is there an advantage either way? Currently, mine is in the beer fridge w/ my kegs. My thoughts were to put it behind (or hide it outside) of the keezer and pipe in the gas to a manifold.
5. If the CO2 is outside, do you drill through the wall of the freezer or run the line through a collar?
1) I don't have the exact measurements handy, but I made sure that I could get a growler under the tap for quick fills.

2) I let mine rest on the seal. Might not be the best for the seal, but didn't see any degradation in the few years that I had mine.

3) T-Nuts

4) I had mine inside, but either way is fine.

5) If you are going to have it outside, however, I would not go through the wall of the freezer. If you are doing a coffin, a collar isn't really needed unless you need the headroom for kegs. I would just run the line in through the same access that beer lines use between the coffin and the freezer.

__________________
The 'Original' Keezer!
Jester369 is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
keezer questions Piney Kegerators and Keezers 9 08-17-2011 01:19 PM
Keezer questions Photopilot Kegerators and Keezers 7 03-19-2010 12:43 PM
New Keezer Questions jmkratt Kegerators and Keezers 3 02-12-2010 12:53 PM
The Keezer is GO!!! Some questions! lucasszy Kegerators and Keezers 1 03-07-2009 08:18 PM
New Keezer Questions AGBrewer Kegerators and Keezers 4 10-21-2007 06:22 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS