Originally Posted by A4J
I have that exact same fridge. Do you have a build thread somewhere or a wiring diagram?
I made that post when i first got the fridge... I was actually planning on making a build thread soon since there seems to be a lack of info on this model.
I used the auberin SYL-2342 (relay output) and simply followed the wiring diagram in the manual for "Cooling and heating with the same controller" (just without the heating).
On the fridge, the brown wire is your lead (attach to 8, with jumper to 9). Blue wire is your negative (attach to 10). Red wire runs back to the compressor (attach to 7).
If you're planning on using the old housing like i did, you will need to dremel away some of the plastic on the inside and the top frame to the width of the PID controler.