Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Bayou KAB 4
Reply
 
Thread Tools
Old 12-30-2011, 05:20 PM   #1
william_shakes_beer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Maryland
Posts: 2,271
Liked 171 Times on 137 Posts
Likes Given: 2

Default Bayou KAB 4

Looking at getting a propane burner for a new 10 gallon brew pot. Looked on amazon at the Bayou KAB 4, and saw a small box with a red knob just downstream of the gas fitting. Is this a flame adjustment or one of those dreaded "safety" timers? Does anyone use this cooker, and, if so, is there sufficient adjustment to control the flame? I'd like to be able to use on a "minimum " setting for temp control BIAB, as well as heat 6.5 Gal of wort in less than 20 minutes. Is this the right cooker to do all that? Finally, if I purchase the standard 20 LB propane cylinder, how many batches can I get out of a cylinder? I'm going to heat strike water, keep it to temp with a lid on the SS kettle, heat sparge water and do a solid 60 minute boil in an outdoor environment of 35F.


william_shakes_beer is offline
 
Reply With Quote
Old 12-30-2011, 06:01 PM   #2
JJL
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
JJL's Avatar
Recipes 
 
Join Date: Feb 2010
Location: , WI
Posts: 1,291
Liked 30 Times on 23 Posts
Likes Given: 2

Default

The KAB4 looks like your typical "Banjo" burner. The red knob is just the regulator. It says it comes with a 30 psi regulator, which should theoretically give you a ton of output. The only negative I've heard about this style of burner is that people seem to think that the burner needs to be mounted higher in the wind screen. I've heard people comment you waste a lot propane because the flame is too far away from the pot and it takes longer to heat your liquid. But, I've also heard that its fairly easy to drill new holes in the frame and mount the burner higher.


JJL is offline
 
Reply With Quote
Old 12-30-2011, 06:04 PM   #3
hopsalot
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2007
Location: Corpus, Texas
Posts: 1,574
Liked 17 Times on 16 Posts
Likes Given: 55

Default

I believe that is a 10 psi regulator, meaning once your tank is at 10 psi the regulator cuts the gas, right above that is a small valve that adjusts the flow.
__________________
In Illa Brettanomyces Nos Fides

http://bjsbrewery.blogspot.com/
hopsalot is offline
 
Reply With Quote
Old 12-30-2011, 08:38 PM   #4
BrewMU
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: Columbia, MO
Posts: 516
Liked 7 Times on 7 Posts
Likes Given: 1

Default Got one a couple weeks ago

I've got one, used it a couple of times. It's a 30 psi regulator, fixed, but there is a little metal dial that says 'close' with an arrow, behind the big red thing. That's your adjustment. It does whip through some serious propane (also gets your boil going right-quick), mainly because of the affect of wind. I'm working on a windscreen of some kind. I have read about people redrilling and moving the burner up in the frame - I'm not sure yet if I will, but it looks like it will be easy, and you would be able to go back to the original set anytime. Good luck - despite this issue, and for ~$80.00, I'm pleased with mine.
BrewMU is offline
 
Reply With Quote
Old 01-02-2012, 01:11 PM   #5
william_shakes_beer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Maryland
Posts: 2,271
Liked 171 Times on 137 Posts
Likes Given: 2

Default

Quote:
Originally Posted by BrewMU View Post
I've got one, used it a couple of times. It's a 30 psi regulator, fixed, but there is a little metal dial that says 'close' with an arrow, behind the big red thing. That's your adjustment. It does whip through some serious propane (also gets your boil going right-quick), mainly because of the affect of wind. I'm working on a windscreen of some kind. I have read about people redrilling and moving the burner up in the frame - I'm not sure yet if I will, but it looks like it will be easy, and you would be able to go back to the original set anytime. Good luck - despite this issue, and for ~$80.00, I'm pleased with mine.
how long does a cyliinder of propane last? more than 1 batch? and is it possible to throttle it back to a simmer to maintain mashing temps?
william_shakes_beer is offline
 
Reply With Quote
Old 01-02-2012, 01:47 PM   #6
BrewMU
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: Columbia, MO
Posts: 516
Liked 7 Times on 7 Posts
Likes Given: 1

Default

I haven't used it very many times, but to tell you the truth, it's been pretty hard on the propane tank. I think it was mainly because of the wind. I'm going to be moving into the garage, so hopefully that will help. And yes, that little gray knob let's you regulate.


BrewMU is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bayou Classic SQ 14 missing hardware. A little help please? jsharp Beginners Beer Brewing Forum 9 03-25-2012 05:17 PM
First time using a bayou burner - help!! fenners Beginners Beer Brewing Forum 14 05-13-2011 02:57 PM
Help with new Bayou Classic SP10 - Not burning very hot jgkelley Beginners Beer Brewing Forum 7 05-10-2011 04:04 PM
temp control using bayou classic Brewhaha4u Beginners Beer Brewing Forum 3 03-07-2011 02:16 AM
Has anyone used Bayou Classic equipment? impatient Beginners Beer Brewing Forum 8 12-23-2009 02:24 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS