Home Brew Forums > Home Brewing Beer > Electric Brewing > Switch for heatstick
Reply
 
Thread Tools
Old 12-28-2011, 07:23 PM   #1
phoenixs4r
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Hayward, California
Posts: 1,516
Liked 55 Times on 50 Posts
Likes Given: 38

Default Switch for heatstick

Hello,

Going to try to make a weldless HLT keggle by the end of the weekend so I can brew!

I believe the last question I need answered is if this switch:

30-Amp Industrial Double Pole White Switch-R52-03032-2WS at The Home Depot

can handle a 5500watt element. My research says yes (as it is rated for 30 amps @ 240v) but I wanted to confirm as I'm not very good with electricity.

I will be running from the panel, to the switch, to the heatstick, which will be (theoretically) be inside the kettle with a weldless fitting from morebeer.

I know this if a far cry from the ideal PID/SSR setup, but in essence it will replace a burner I don't really want up high.

Thanks in advance!

Mike


phoenixs4r is offline
 
Reply With Quote
Old 12-28-2011, 07:31 PM   #2
Shockerengr
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2007
Posts: 453
Liked 22 Times on 19 Posts
Likes Given: 1

Default

The title says double pole, but the specs show single pole...
You'd really want a double pole switch to cut all the power off, not just one leg. A single pole will stop the element from heating, but there will still be 120v present everywhere.

As for the design, you'll probably have some difficultly controlling the boil since you'll have an all or nothing system, and 5500W may result in excessive amounts of boiloff


Shockerengr is offline
 
Reply With Quote
Old 12-28-2011, 07:33 PM   #3
phoenixs4r
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Hayward, California
Posts: 1,516
Liked 55 Times on 50 Posts
Likes Given: 38

Default

Wont be boiling, it will be for heating mash water and sparge water.

So a double pole switch is ok, just not that one?
phoenixs4r is offline
 
Reply With Quote
Old 12-28-2011, 09:51 PM   #4
Shockerengr
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2007
Posts: 453
Liked 22 Times on 19 Posts
Likes Given: 1

Default

Ok, the switch might be ok, I don't trust the specs they put online often. Basically look that it switches both wires so you cut all power when you turn off power, then you should be good
Shockerengr is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
BIAB with Heatstick...is this possible? TheGrouch Electric Brewing 3 09-29-2011 10:52 PM
HLT + Heatstick rasherb Electric Brewing 11 03-08-2011 10:13 PM
Heatstick problem... FenderSteve Electric Brewing 7 01-23-2011 02:44 PM
Heatstick melted! Gritsak Electric Brewing 8 01-22-2011 06:22 PM
OK I did something really wrong with this heatstick ReverseApacheMaster Electric Brewing 46 01-06-2011 05:22 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS