Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns, & Hot Liquor Tanks > 50 qt Ice Cube Weldless bulkhead
Reply
 
Thread Tools
Old 12-28-2011, 03:02 AM   #1
Rowdy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Brick, New Jersey
Posts: 459
Liked 12 Times on 12 Posts
Likes Given: 2

Default 50 qt Ice Cube Weldless bulkhead

i am adding a weldless bulkhead to my ice cube mlt, its the 50 qt so it wasnt drilled, drilled the hole everything fits perfect am getting mixed results about what configuration to set the bulkhead with, both big O rings, both small O rings, one big one small just one on the outside washers no washers etc.

i know most leaks are caused during operator error while installing.
so whats the deal?


__________________
Cruiscín Lán Grúdlann
In wine there is wisdom, In beer there is freedom, In water there is bacteria.
Rowdy is offline
 
Reply With Quote
Old 12-28-2011, 03:27 AM   #2
dezman
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Marquette, Michigan
Posts: 147
Liked 1 Times on 1 Posts

Default

Took me a while to get mine leak free, I think I have two small o-rings, one on each side of the wall, and two washers one on each side as well. Then I just tightened the crap out of it. Was kind of a pain in the ass but it eventually worked, just keep tryin'


dezman is offline
 
Reply With Quote
Old 12-28-2011, 03:52 AM   #3
Rowdy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Brick, New Jersey
Posts: 459
Liked 12 Times on 12 Posts
Likes Given: 2

Default

i dont have any leak issues, havent installed yet just want to make sure i install it right the first time. all searches come up with keggles or kettles
__________________
Cruiscín Lán Grúdlann
In wine there is wisdom, In beer there is freedom, In water there is bacteria.
Rowdy is offline
 
Reply With Quote
Old 12-28-2011, 04:15 AM   #4
lonepalm
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Raleigh, NC
Posts: 213
Liked 3 Times on 3 Posts
Likes Given: 10

Default

Trying to work through this for first AG on Monday too.
lonepalm is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Weldless bulkhead Rivenin Kettles, Mash Tuns, & Hot Liquor Tanks 1 06-29-2011 04:25 AM
weldless bulkhead install ? bucfanmike Kettles, Mash Tuns, & Hot Liquor Tanks 2 06-28-2011 11:15 PM
Leaking Weldless Bulkhead MikeSar Kettles, Mash Tuns, & Hot Liquor Tanks 3 10-20-2010 01:19 PM
Weldless Bulkhead orangehero Kettles, Mash Tuns, & Hot Liquor Tanks 10 10-04-2010 09:10 PM
Bulkhead - Weldless vs Welded mrcleanwell Kettles, Mash Tuns, & Hot Liquor Tanks 8 02-09-2009 04:04 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS