Brew House For Sale - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Brew House For Sale

Thread Tools
Old 05-03-2007, 09:23 PM   #1
May 2007
Posts: 6

hate to do it but I have to sell it. I have more than what’s listed here If anyone is interested.

Anyway the Brewery is a mobile unit built on a steel frame with wheels. All three tuns, hot liquor, mash, and kettle are made from SS Sanky beer kegs and fitted with ball valves and wells for Ashcroft thermometers. Everything is hard-lined except the hose from the counterflow chiller to whatever fermenter you’re using. (I always used 20 gallon white poly drums.)

All three tuns have 175,000 BTU burners, and all gas controls, (actually all the controls) are mounted on a central front mounted panel. There is an on-board water filter and supply lines to all three vessels, the top center tank has a sight glass and is for hot liquor which gravity feeds the left lower mash tun.

The mash tun has its own 110 VAC pump for recirculation (vorlof) and a 175,000 BTU burner for use in RIMS or step mashing and for transferring wort to the brew tun (kettle). (I also use it to hit strike temp before doughing in the goods) The mash tun is fitted with a hinged SS perforated-plate false bottom and SS lines to the lower outlet valve. All lines outside the Tuns are copper, all those within are ½” SS.

The brew Kettle has a separate 110 VAC recirculation pump (hot pump) for whirl pooling the finish hops and transferring the hot wort through the counterflow wort chiller which is mounted behind the control panel in the center of the system. The entire system is designed to be self cleaning using re-circulated boiling water or the chemical of your choice. The mash side is separated by a central ball valve so a second mash can be run while the brew kettle is in operation. I always used 90 minute mashes and 90 minute brew cycles. So one ½ barrel keg can be brewed in 3 hours and another one every 90 minutes thereafter, for as long as you want to keep it up.

This system has only been used once in the last five years but before that I brewed about three times a month. I’d want to clean it up and cycle some one-step through it before I passed it on. I also have a half dozen or so “corn cans”
aka Pepsi Syrup SS Kegs and the tap fittings, gas bottles, regulators etc for the tap system. For that matter I have every tap head from Golden Gate to Sanky. A brand new bracketing thermostat system and taps and tower for converting a chest type freezer to a kegerator. Then there are a couple of boxes of brewery and yeast culturing equipment. A professional refractometer, A 300X lab microscope with slides and cover glass. Several hydrometers boxes of test tubes and on and on.

There is also a SS distillation tower which I purchased from accompany on-line as well as a small one from Still Spirits from New Zealand. It would take a pick up to haul all this stuff and I’ll have to figure out what it would cost. I have well over $1,000 into the brewery alone but would consider an offer in any case. Let me know if your interested in any or all of this.

Reply With Quote
Old 05-03-2007, 09:29 PM   #2
olllllo's Avatar
Apr 2006
Phoenix, Arizona
Posts: 13,330
Liked 140 Times on 114 Posts

Be nice to know where you are...
Rabbit And Coyote Schwag
Rob - Phoenix Ambassador to Milwaukee
Where did your avatar go?
Ginger Beer for Moscow Mules Bacon Vodka

Reply With Quote
Old 05-03-2007, 09:43 PM   #4
Lil' Sparky
Cowboys EAC
Lil' Sparky's Avatar
Feb 2006
Honolulu, HI
Posts: 3,959
Liked 73 Times on 46 Posts

Wow, sounds like a great deal for someone who wants to seriously upgrade their brewery and has the cash.

Reply With Quote
Old 05-03-2007, 10:15 PM   #5
jdoiv's Avatar
Mar 2007
Nashville, TN
Posts: 1,152
Liked 1 Times on 1 Posts

Location and Pics would probably get you more serious inquiries.
Drinking on the keg: BPA, Brown Ale, Dry Mead, Wee Heavy aged on Oak, CAP
Drinking in the Bottle:

Reply With Quote
Old 05-03-2007, 10:26 PM   #6
homebrewer_99's Avatar
Feb 2005
Atkinson (near the Quad Cities), IL
Posts: 17,796
Liked 136 Times on 102 Posts

I agree...where the hell are you????
HB Bill

Reply With Quote
Old 05-03-2007, 10:31 PM   #7
Will work for beer
Dude's Avatar
Jan 2005
Knob Noster, Missouri
Posts: 8,770
Liked 89 Times on 70 Posts

Please let it be in Virginia!
On Tap: Lake Walk Pale Ale -- Eternity (Raspberry Stout) -- Nutrocker -- Donnybrook Dark
Primary: Lake Walk Pale Ale
Secondary: Summit IPA
Up Next: Smoked Porter -- Pub Ale -- Watermelon Wheat
Gone But Not Forgotten:

Reply With Quote
Old 05-03-2007, 10:31 PM   #8
Desert_Sky's Avatar
Mar 2006
Sierra Vista, AZ
Posts: 4,077
Liked 53 Times on 41 Posts

Originally Posted by Navionjim
So one ½ barrel keg can be brewed in 3 hours and another one every 90 minutes thereafter, for as long as you want to keep it up.
music to my ears

Reply With Quote
Old 05-03-2007, 11:01 PM   #9
Apr 2007
Mount Morris,MI
Posts: 19
Liked 1 Times on 1 Posts

he is in houston, texas
__________________ my home away from home

Reply With Quote
Old 05-03-2007, 11:23 PM   #10
jlinner's Avatar
Sep 2006
Pinetop, Arizona
Posts: 68


Pics please. I may have to make a trip to Texas.
"The ability to quote is a serviceable substitute for wit."

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help me restructure my Brew House mangine77 Brew Stands 11 02-12-2009 06:58 PM
New guy using Brew House kit with modifications ajk170 Extract Brewing 6 10-07-2008 10:35 AM
Brew House Cream Ale toadyus Beginners Beer Brewing Forum 0 12-13-2007 05:32 AM
Brew House kits Kevin K Beginners Beer Brewing Forum 4 04-19-2006 10:25 AM
Brew House mworkman Beginners Beer Brewing Forum 3 03-13-2006 11:53 AM

Forum Jump