Originally Posted by BiggieB400
I thought star san required 3 minutes of contact time?? I do agree that it doesn't matter whether it is liquid or foam... I error on the side of caution when it comes to sanitization!!
I stand corrected...from the Five Star Chemicals web site
"Homebrew use: Thoroughly wash all surfaces with detergent or a compatible cleaner, followed by a
potable water rinse before application of sanitizing solution. Prepare a use solution of 1 oz. of Star San
per 5 gallons of tap water. Apply on surfaces with a cloth mop, sponge, spray or by a 5 minute
immersion. For spray applications, use a course mist, with pump or trigger spray. Spray 6 to 8 inches
from surface; rub with a brush, cloth or sponge. With spray, cover or remove all food products. For all
applications, allow to air dry, however surfaces must remain wet for at least one minute.
Do not rinse after Star San application."