Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Propane Lines for Brew Stand
Reply
 
Thread Tools
Old 12-14-2011, 07:22 PM   #21
gtn80
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Portland, ME
Posts: 52
Default

Quote:
Originally Posted by MaltedLiver View Post
Me Too
The propane hoses are from here:

Propane Hose Assemblies - Product - Camping World

They have 3/8" flare connections. So I have these jets screwed into my burners:

High Pressure Propane Jet for H205 | MoreBeer

Then at the other end, I have needle valves, these:

FNPT / MPT Needle Valve Brass Fitting

I bought 3/8" male flare to 1/4" MNPT converter at Home Depot to connect the hose to the needle valve.

The needle valve screws into a 1/4" FNPT to 1/2" MNPT coupler which screws into the iron pipe.

Then the rest is just iron pipe fittings to a gas valve from Home Depot finally to the regulator that I took off my Bayou Classic burner.


gtn80 is offline
 
Reply With Quote
Old 12-14-2011, 11:18 PM   #22
jedheuer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: Sonoma, Ca
Posts: 34
Default

would this setup work hooked up to my home gas supply line?


jedheuer is offline
 
Reply With Quote
Old 12-29-2011, 02:13 PM   #23
tulsabrewdaddy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: Tulsa, OK
Posts: 166
Liked 2 Times on 2 Posts

Default

@gtn80 - What burners are you using?
tulsabrewdaddy is offline
 
Reply With Quote
Old 12-29-2011, 02:16 PM   #24
gtn80
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Portland, ME
Posts: 52
Default

Two SP-10's and an SP14
gtn80 is offline
 
Reply With Quote
Old 12-29-2011, 02:53 PM   #25
nyer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: Merritt Island, Florida
Posts: 851
Liked 7 Times on 6 Posts

Default

Quote:
Originally Posted by humblesea View Post
So I made a little drawing with the parts I can use, plus some various fittings and the black pipe that I can get from Home Depot.

Fitting from tank: BRASS PROPANE QCC1 FITTING - Agri Supply

To black pipe: LP GAS HOSE ASSEMBLY - Agri Supply

Black pipe to regulator: HIGH PRESSURE REGULATOR 130 LB. #140 SET - Agri Supply

Regulator to burner: LP GAS HOSE ASSEMBLY - Agri Supply

Can I order these parts and get the rest from HD?

I have 3 regulators on mine like in your drawing. I did it that way because I already had them but now I'm thinking about using one and then adding 3 valves. I'm like to see the needle valves people are using, I don't like the regular on/off valves because you don't have much control.
nyer is offline
 
Reply With Quote
Old 12-30-2011, 09:28 PM   #26
infantej
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Michigan
Posts: 23
Liked 2 Times on 2 Posts

Default

I'm looking for a little help on this as well. I have the black pipe and have it run back to my propane tanke. I picked up gas ball valves from lowes. Will those work? Also, I ordered my burners from agrisupply but they have not arrived yet. Do they come with the jets? If not, where can I pick them up? I'm supposed to brew Sunday. Thanks.



Shop BrassCraft 1/2" x 1/2" FIP Straight Gas Ball Valve at Lowes.com
infantej is offline
 
Reply With Quote
Old 12-30-2011, 09:39 PM   #27
OneHoppyGuy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Concord, CA
Posts: 1,704
Liked 42 Times on 34 Posts
Likes Given: 52

Default

This is the size you want unless you use an adapter or a custom hose with different size ends.
The cast iron burners use a 3/8" FIP fittings
OneHoppyGuy is offline
 
Reply With Quote
Old 12-30-2011, 09:44 PM   #28
infantej
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Michigan
Posts: 23
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by OneHoppyGuy View Post
This is the size you want unless you use an adapter or a custom hose with different size ends.
The cast iron burners use a 3/8" FIP fittings
Okay, but how do I connect to the burners? I'd prefer to not order the part.
infantej is offline
 
Reply With Quote
Old 12-30-2011, 09:50 PM   #29
OneHoppyGuy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Concord, CA
Posts: 1,704
Liked 42 Times on 34 Posts
Likes Given: 52

Default

You need a hose or pipe assembly from your valve with a 1/2" female flare on one end and a 3/8" female flare on the other.

OneHoppyGuy is offline
 
Reply With Quote
Old 12-30-2011, 10:11 PM   #30
infantej
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Michigan
Posts: 23
Liked 2 Times on 2 Posts

Default

I think we are talking about different things. where do I get the fittings in your picture that are attached to the burners?


infantej is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Propane Manifold for Brew Stand Question DrewC Brew Stands 2 11-26-2011 01:03 PM
Stainless propane lines bgarino Brew Stands 6 03-19-2011 12:58 AM
Using copper tubing for propane lines BrianL Brew Stands 10 09-13-2010 06:31 PM
Propane leak on stand Captain_Bigelow Brew Stands 14 08-07-2010 10:48 PM
Add wood extension to stand up fridge for lines jcojr72 Kegerators and Keezers 8 04-05-2010 09:58 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS