Brutus 10 Question - I'm no engineer - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Brutus 10 Question - I'm no engineer
Cool Brewing Corny 5G & Mini Giveaway

Reply
 
Thread Tools
Old 12-01-2011, 03:41 PM   #1
meatwad
Recipes 
 
Join Date: Feb 2011
Location: Lodi, CA
Posts: 154
Liked 2 Times on 2 Posts


Hey now!

So, I'm looking at building out a Brutus 10 with some help from a buddy with a machine shop. I keep lookin at all these designs and they appear quite high off the ground.

What would be the CONS of having this thing built much lower to the ground, so it would be easier to see inside the kettles, add water, add grain, etc? Am I missing something here? I'm guessing maybe the pumps need some space, or the hoses would drape to the ground...just need to think thru this.

Very new to this type of system, would love any insight you all can provide!

Cheers,
Meatwad



 
Reply With Quote
Old 12-01-2011, 03:54 PM   #2
Suthrncomfrt1884
Recipes 
 
Join Date: Jun 2009
Location: Rockford, Illinois
Posts: 4,063
Liked 25 Times on 23 Posts
Likes Given: 3


I thought the same thing when I built my stand. But...in the end I was much happier with the higher design. For the amount of time you spend operating ball valves and switching hoses compared to adding grains and water...it makes sense to put the valves closer to waist level. It saves me from having to bend over all the time anyways.


__________________
He who drinks beer sleeps well. He who sleeps well cannot sin. He who does not sin goes to heaven.

Another HERMS rig...

 
Reply With Quote
Old 12-01-2011, 04:50 PM   #3
OneHoppyGuy
Recipes 
 
Join Date: Nov 2009
Location: Concord, CA
Posts: 1,648
Liked 44 Times on 36 Posts
Likes Given: 52


I echo Southern's statement and add that you should have a 12" drop from kettle to pump.
Please consider not doing the gas beam, this is really unsafe.

 
Reply With Quote
Old 12-01-2011, 04:57 PM   #4
rekoob
HBT_LIFETIMESUPPORTER.png
 
rekoob's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Norfolk, VA
Posts: 1,408
Liked 106 Times on 81 Posts
Likes Given: 13


I did lower mine just a bit, have keggles and wanted to see inside without much trouble. I agree with the above that most of what you do you will be happy with not bending to do it. If you make it like Lonie's you could always cut off some of the leg if you decided it was to high after a few brews. That being said you might want to start a little higher than you think you want so you can adjust down the road if you want to. It's a wonderful system and every time I pull into the garage it makes me smile.

 
Reply With Quote
Old 12-01-2011, 05:02 PM   #5
Beeskneesbrew
Recipes 
 
Join Date: Mar 2011
Location: Des Moines, Iowa
Posts: 128
Liked 3 Times on 2 Posts


Here is a pic of mine, it is lower than most. It's only a start, still needs casters.

Click image for larger version

Name:	ForumRunner_20111201_110221.jpg
Views:	309
Size:	15.1 KB
ID:	39587

 
Reply With Quote
Old 12-01-2011, 06:19 PM   #6
Suthrncomfrt1884
Recipes 
 
Join Date: Jun 2009
Location: Rockford, Illinois
Posts: 4,063
Liked 25 Times on 23 Posts
Likes Given: 3


Quote:
Originally Posted by OneHoppyGuy View Post
I echo Southern's statement and add that you should have a 12" drop from kettle to pump.
Please consider not doing the gas beam, this is really unsafe.
I also consider the gas beam to be very unsafe...but I went with it anyway. I basically used Lonnie's design for the stand itself...everything else (burners, automation, etc.) I've gone other routes.

My gas beam doesnt leak and seems to be working great, but who knows what might happen if I break a weld...
__________________
He who drinks beer sleeps well. He who sleeps well cannot sin. He who does not sin goes to heaven.

Another HERMS rig...

 
Reply With Quote
Old 12-02-2011, 12:04 AM   #7
bendiy
Recipes 
 
Join Date: Jan 2011
Location: Boulder, CO
Posts: 127
Liked 4 Times on 4 Posts
Likes Given: 7


Some stands are setup so you can store your keggles underneath the burners when not in use. I've set mine up this way. I designed the stand so I can still reach the bottom of the keggles with my hand when everything is setup. You will need to be at least 5'9"-6' tall to do this without a stool.

Another nice requirement when setting the height is to be able to gravity feed into a fermentor. I know you will have pumps, but having enough height to gravity feed from one keggle on the stand to one on the floor is nice if you ever get into a pinch. Your pump could die, your electricity could go out or your might be using both pumps while mashing and want to drain cleaner from your boil kettle to your carboy.

 
Reply With Quote
Old 12-02-2011, 01:53 AM   #8
OneHoppyGuy
Recipes 
 
Join Date: Nov 2009
Location: Concord, CA
Posts: 1,648
Liked 44 Times on 36 Posts
Likes Given: 52


Why not store the kettles on top the stand? just curious

 
Reply With Quote
Old 12-02-2011, 03:51 AM   #9
gbrewing
Recipes 
 
Join Date: Nov 2008
Location: Washington State
Posts: 86
Liked 4 Times on 3 Posts
Likes Given: 2


Quote:
Originally Posted by OneHoppyGuy View Post
Please consider not doing the gas beam, this is really unsafe.
+1.

You can do something similar by simply using black pipe.
__________________
http://www.gbrewing.com

 
Reply With Quote
Old 12-02-2011, 06:34 PM   #10
bendiy
Recipes 
 
Join Date: Jan 2011
Location: Boulder, CO
Posts: 127
Liked 4 Times on 4 Posts
Likes Given: 7


Quote:
Originally Posted by OneHoppyGuy View Post
Why not store the kettles on top the stand? just curious
It takes up less room in storage. You can roll it under a counter or shelf. It's easier to transport if you want to take it to a brew-in. I have 3 Rubbermaid tubs of misc brewing stuff that can stacked on top of the stand when not in use.

If the stand is carefully designed, you are only adding 2-4 inches to the height over some of the standard designs. So why not leave room underneath?



 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brutus tubing question sgraham602 Brew Stands 31 11-18-2011 01:03 AM
Brutus 10 question Emc Brew Stands 6 10-21-2011 06:08 PM
LPG Brutus Question mmurray Brew Stands 8 01-11-2011 04:04 PM
To Brutus, or not to Brutus. That is the question... ubermick Brew Stands 30 08-04-2010 12:45 AM
Brutus Build Question Brewpatrol Brew Stands 13 02-26-2010 05:47 AM


Forum Jump