Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Stainless Steel 1/2" Barbed Elbow?
Reply
 
Thread Tools
Old 11-23-2011, 11:40 PM   #1
jcraig
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: Beanblossom, Indiana
Posts: 13
Default Stainless Steel 1/2" Barbed Elbow?

So, apparently there is no such thing as a Stainless Steel 1/2" NPT x 1/2" Barbed Elbow fitting. I have been searching the internet for about 3 days now and cannot find one. Basically, I need this fitting;



...but with a 1/2" barb (instead of 3/8").

I purchased the Bargainfittings.com cooler bulkhead kit with the optional female 1/2" hose barb for the inside fitting to connect to a false bottom. However, every false bottom I find has a 3/8" barbed elbow. I purchased the AIHB False Bottom without the fittings assuming I could put one together with a 1/2" barb. No such luck.

Looks likes I should have gone with a standard 1/2" coupler, and attached a 3/8" barb instead. The only other option I can think of is to use a 1/2" 90deg. Street elbow, and attach a 1/2" straight barb for the false bottom connection.

Any suggestions? Thanks in advance!


jcraig is offline
 
Reply With Quote
Old 11-24-2011, 04:12 PM   #2
Bsquared
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Bsquared's Avatar
Recipes 
 
Join Date: Oct 2006
Location: San Diego
Posts: 1,830
Liked 58 Times on 53 Posts
Likes Given: 22

Default

eBay My World - mainlandvf

email this guy, i got fittings like these a while back from him. he does not have any listed right now...as far as i could see. but he might have some.


Bsquared is offline
 
Reply With Quote
Old 11-24-2011, 05:30 PM   #3
jcraig
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: Beanblossom, Indiana
Posts: 13
Default

Excellent! Thanks so much Bryan. Just ordered this one;
90* HOSE BARB 1/2" ID X 1/2" MPT HEX BREWING 316 <HB628 | eBay



I know most use the 3/8" barbed elbow in cooler mash tuns, but I had already ordered the 1/2" female barbed elbow with my bulkhead (without the coupler) inside the MT, hopefully allowing more clearance for the false bottom, and perhaps a slightly reduced flow rate under the FB due to the larger diameter tubing.
jcraig is offline
 
Reply With Quote
Old 11-24-2011, 06:30 PM   #4
JonW
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
JonW's Avatar
Recipes 
 
Join Date: Dec 2009
Location: Huntington Beach ☼
Posts: 1,672
Liked 142 Times on 89 Posts
Likes Given: 61

Default

Blichmann has a series of 1/2" NPT fittings that might work. Check out their 90 degree elbow. Since it is female, you may need a hex nipple for it.
Blichmann Engineering

__________________
Surf City Brewing (TM)

My Single Tier, 3 Pump, BCS-462, Brutus Build:..... [LINK]
My customized BCS-462 controller web interface:.. [LINK]
My 8 tap, 11 keg, upright Keezer build:.................... [LINK]
JonW is offline
 
Reply With Quote
Old 11-24-2011, 06:50 PM   #5
rcrabb22
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
rcrabb22's Avatar
Recipes 
 
Join Date: Jun 2008
Location: Illinois
Posts: 736
Liked 21 Times on 15 Posts
Likes Given: 17

Default

McMaster-Carr has them

http://www.mcmaster.com/#barbed-tube-fittings/=f2qvaj

search for part number 5670K19 pricey at $6.54 a piece + S&H but if you gotta have them.............

EDIT: I didn't read your post correctly - please ignor
rcrabb22 is offline
 
Reply With Quote
Old 11-24-2011, 07:48 PM   #6
Rondacker
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Great Sacandaga Lake, New York
Posts: 225
Liked 7 Times on 7 Posts
Likes Given: 7

Default

How about a 90_deg street el?
You can force 1/2" silicone over the threads. My plan is to use them rather than barbed fittings for better flow.
You would need a nipple though.
__________________
Ein Bier, Bitte!

On Deck= Witt
Brewing=
Primary= Ed Wort's Apple Wine,
Secondary= Air
Bottled= Lots of Beer
Drinking= 2013 Maple Sap Ale, Columb-MO SMaSH IPA, Brando O's Graff.
Rondacker is offline
 
Reply With Quote
Old 01-25-2013, 02:35 PM   #7
aubiecat
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Alexander City, Alabama
Posts: 1,197
Liked 129 Times on 98 Posts
Likes Given: 41

Default

Quote:
Originally Posted by Rondacker View Post
How about a 90_deg street el?
You can force 1/2" silicone over the threads. My plan is to use them rather than barbed fittings for better flow.
You would need a nipple though.
Brew Hardware has these.
aubiecat is offline
 
Reply With Quote
Old 08-22-2014, 09:51 AM   #8
rajendrafittings
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2014
Posts: 1
Default

please check http://www.rajendrafittings.com/90_degree_elbow.html i think u will get what you want...
rajendrafittings is offline
 
Reply With Quote
Old 08-22-2014, 09:16 PM   #9
acidrain
Feedback Score: 3 reviews
Recipes 
 
Join Date: Jul 2012
Location: Seattle, Washington
Posts: 1,911
Liked 162 Times on 140 Posts
Likes Given: 32

Default

Quote:
Originally Posted by aubiecat View Post
Brew Hardware has these.
These are by far the best fittings on the market in my opinion.
They are 1/2" inside diameter and you have to stretch the hose over them, which is easily done.
__________________
Keg #1: Brown Bomber Bourbon/Oak Vanilla Porter
Keg #2: The Bollocks ESB
Keg #3 Lawnmower APA
Fermenter: Empty
Bottled: Mjolnir Mead, Lazy Daze Hefe.
acidrain is offline
 
Reply With Quote
Old 08-23-2014, 01:54 AM   #10
aubiecat
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Alexander City, Alabama
Posts: 1,197
Liked 129 Times on 98 Posts
Likes Given: 41

Default

Quote:
Originally Posted by rajendrafittings View Post
please check http://www.rajendrafittings.com/90_degree_elbow.html i think u will get what you want...
If I need 80,000 90 degree elbows I'll give you a holla.


aubiecat is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
5/8" Stainless Steel Washers barleydude Equipment/Sanitation 6 07-06-2012 05:23 PM
Stainless Steel Barbed Fittings for Chugger / March Pump -Found before, but lost link Jewrican Equipment/Sanitation 9 04-21-2011 06:06 PM
Where to buy 1-1/4" or 1-1/2" Stainless Steel Ball Valve sjlammer Equipment/Sanitation 4 01-31-2011 01:59 PM
3/4" Stainless Steel washer is a stealthy creature phidelt844 Equipment/Sanitation 16 02-15-2009 02:40 PM
5/8" Stainless Steel Washer for MLT jacobyhale Equipment/Sanitation 4 11-09-2007 07:26 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS