Brewhemoth - Which Fittings - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Brewhemoth - Which Fittings

Thread Tools
Old 11-20-2011, 02:19 AM   #1
Jul 2008
Chicago ~ Rogers Park
Posts: 153

I'm looking to order the tri clover fittings for my recently ordered brehemoth and am wondering what the best valve/set up is for the side port were I assume the beer will be pulled from to go to the keg. I'm thinking butterfly valve to hose barb but I'm wondering if the sample valve would be work just as well.

For the top I'll be going with a "T", 24" thermowell, & camlock on NPT so that I can just use a blow off all the time. Will the thermowell interfere with the internal chiller?

The bottom port will just be a butterfly valve for dumping.

Any thoughts on the set up or anything I'm missing?

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Brewhemoth conicals? strat_thru_marshall Equipment/Sanitation 892 03-24-2014 12:53 PM
New Brewhemoth conicals! Mpez Equipment/Sanitation 36 05-08-2012 02:45 PM
racking arm for Brewhemoth Celticway Equipment/Sanitation 12 10-03-2011 10:45 PM
Brewhemoth Chiller pump 2funkids Equipment/Sanitation 21 09-09-2011 02:07 AM
Jet engine Brewhemoth 2funkids Equipment/Sanitation 6 07-28-2011 07:38 PM

Forum Jump