Propane Manifold for Brew Stand Question - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Propane Manifold for Brew Stand Question

Reply
 
Thread Tools
Old 11-19-2011, 10:44 PM   #1
DrewC
Recipes 
 
Mar 2009
Posts: 29


I'm putting together my parts for my manifold. I was going to use my regulator off my SQ14 burner. My plan was to have that thread into a bushing that connects to the black pipe, then to a tee, to a valve, etc, etc.

My regulator hose has the orifice attached. Any problems with this?

 
Reply With Quote
Old 11-19-2011, 10:47 PM   #2
day_trippr
Recipes 
 
May 2011
Stow, MA
Posts: 18,359
Liked 3222 Times on 2408 Posts


Quote:
Originally Posted by DrewC View Post
I'm putting together my parts for my manifold. I was going to use my regulator off my SQ14 burner. My plan was to have that thread into a bushing that connects to the black pipe, then to a tee, to a valve, etc, etc.

My regulator hose has the orifice attached. Any problems with this?
Yes, that's going to be a problem. The orifice should be in its proper location in the venturi bell. Having it upstream isn't going to produce a proper burn...

Cheers!

 
Reply With Quote
Old 11-26-2011, 02:03 PM   #3
DrewC
Recipes 
 
Mar 2009
Posts: 29

I will still have another orifice screwed into each burner. I guess I'm trying to save some cash and reuse the regulator I have.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
brew stand question jakobic Brew Stands 3 08-13-2011 05:36 AM
from propane cylinder to manifold krazykraut Brew Stands 0 02-01-2011 04:44 AM
Propane fittings - Manifold BendBrewer Brew Stands 5 01-18-2011 10:38 PM
Help with propane manifold build fishnfever Brew Stands 0 09-30-2010 07:26 PM
Question about building a Propane Manifold harten74 Brew Stands 4 11-20-2009 03:37 AM


Forum Jump