Cheap ebay PID as freezer temp control - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > Cheap ebay PID as freezer temp control

Reply
 
Thread Tools
Old 11-15-2011, 06:39 PM   #1
mrbippers
Recipes 
 
Apr 2011
Chicago, IL
Posts: 53


Ebay has a ton of cheap PIDs available for around $20 with thermocouple (model REX-C100 when that link dies). I'm wondering if I could use this to run a chest freezer as a fridge. I know when doing this you skip the SSR and just tie the freezer into the PID output. The specs say it's rated at 3a 250V. My question is if a small to mid size chest freezer running at 120V will be too much of a load?

 
Reply With Quote
Old 11-15-2011, 07:06 PM   #2
P-J
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Mar 2010
Charlotte, NC
Posts: 3,336
Liked 301 Times on 235 Posts


The only thing that I do NOT like about that sale ad is that they really do not tell you a single thing about the pid. (Who makes it? The root specifications about it? A link to the data sheet on it? ...)

i.e. - you 'could' be good to go - or - you 'could' throw your money and time away.

IMHO - get devices that others have used and set up with success.

I really think that - that one is down the wrong path for you.

Another issue? Your time is money as well. A little more? Sooner? From a reliable resource?

(So Sorry. I'm being a PITA.!)

P-J

 
Reply With Quote
Old 11-15-2011, 09:03 PM   #3
Brickout
 
Brickout's Avatar
Recipes 
 
Feb 2010
Lockport, IL
Posts: 268
Liked 31 Times on 11 Posts


Looks like the temp is in Celsius as well.

 
Reply With Quote
Old 11-16-2011, 03:35 PM   #4
mrbippers
Recipes 
 
Apr 2011
Chicago, IL
Posts: 53

Celcius isn't a problem, I'm a scientist by trade. The whole grey area about everything else is. Thanks for the feedback, you convinced me to go another route.

 
Reply With Quote
Old 11-16-2011, 03:51 PM   #5
tolonen
Recipes 
 
Aug 2011
detroit, mi
Posts: 16
Liked 1 Times on 1 Posts


A PID would be the wrong type of control for a freezer. It would short cycle the compressor and burn it out pretty quickly.

There are cheap ebay controllers that work well for freezer temp control, they include short-cycle protection timers. I use the STC-1000 and it's been working great for the past few months I've used it. Lots of info about it in the DIY section of the forum:

http://www.homebrewtalk.com/f51/ebay...-build-163849/

There are many other threads on there about other assemblies too with that same controller. I picked up a couple since I'm using the same setup as a temp controller for a ferm wrap too.

 
Reply With Quote
Old 11-16-2011, 04:02 PM   #6
runningweird
HBT_SUPPORTER.png
 
runningweird's Avatar
Recipes 
 
Dec 2009
State Line, PA, Pennsylvania
Posts: 2,068
Liked 91 Times on 67 Posts


a quick googling turned up the product manual: http://www.rkcinst.co.jp/english/pdf.../imnzc17e3.pdf
__________________
My 6 Tap Long Draw Tower Build:
http://www.homebrewtalk.com/f35/long...-tower-271578/

 
Reply With Quote
Old 11-16-2011, 04:03 PM   #7
mrbippers
Recipes 
 
Apr 2011
Chicago, IL
Posts: 53

I thought the short cycle was only an issue if you were running it through a SSR? At any rate I just ordered something pretty similar to what you used.

 
Reply With Quote
Old 11-16-2011, 05:01 PM   #8
tolonen
Recipes 
 
Aug 2011
detroit, mi
Posts: 16
Liked 1 Times on 1 Posts


The SSR is a solid state relay that allows a low current rated device to control a high current load. In typical usage as a kettle element heater controller the PID (lowcurrent rated device) signals the SSR to allow power to the high current draw element to maintain a temperature.

My PID for boil kettle is set to a PWM cycle time of 4 seconds. I have my short-cycle timer on the freezer controller set to 10 minutes.

 
Reply With Quote
Old 11-16-2011, 07:37 PM   #9
Bsquared
HBT_LIFETIMESUPPORTER.png
 
Bsquared's Avatar
Recipes 
 
Oct 2006
San Diego
Posts: 1,850
Liked 67 Times on 59 Posts


I'v been running one of my freezer chests off a cheap ebay PID for two years now. It works great. At first I tried to use a SSR and the PID, but the rapid cycling of the PID would not allow the compressor to turn on. The one I got has a 10A relay for the high temp alarm, so I wired the power supply for the compressor through the high temp alarm. No SSR needed.

from looking at the manual runningweird posted the alarm on this PID is rated at 1A for 250VAC (or is it 3A?) , so this PID might not work too well to run the compressor off the high temp alarm.

Personally it was more hassle than it was worth, and setting the temp is some what of a chore. I'd go with a $50 ranco controller . Ive bought 4 from these guys over the years.

docrw Likes This 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Control panel temp. question Im_Lars Electric Brewing 9 11-02-2011 07:54 PM
Temp control software movet22 Electric Brewing 13 10-11-2011 01:52 AM
Anybody using these eBay SSRs? BulldogBrewer Electric Brewing 10 08-03-2011 05:09 AM
Ebay RTD smellysell Electric Brewing 10 07-06-2011 09:40 PM
Ebay PID... is it ok? kklowell Electric Brewing 4 11-13-2010 02:03 AM


Forum Jump