First 10 gallon batch... - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > First 10 gallon batch...

Reply
 
Thread Tools
Old 11-13-2011, 12:54 AM   #1
Dale_3rd
Recipes 
 
May 2011
Cambridge, MD
Posts: 56


Well, I ventured into my first 10 gallon brew day. Now I really see why they call it a brew DAY. It was a Biermuncher Cream of Three Crops that I sub'd Liberty for Crystal because I didn't have any. My efficiency was way higher than expected too. I planned on 70% and hit 78%, ended up with about 3 gallons over that I did a separate boil on. My 11.5 gallon main boil landed right on 1042 like I was aiming for. Overall, I was really happy with mostly the whole day except the chilling. I must be doing something wrong in my technique with the wort chiller. I'm using a KegCowboy 40 plate chiller and it took WAAAY longer than I expected to cool down 11.5 gallons of wort. Starting at 208F it took about 40 minutes to hit 68F running 58F water.

Other than that, all that's left is to let the yeasties do their job.



 
Reply With Quote
Old 11-14-2011, 12:41 AM   #2
Dale_3rd
Recipes 
 
May 2011
Cambridge, MD
Posts: 56

Wow, I seem to kill my own threads. :|

I thought someone would at least respond to the part about how I'm doing something wrong with the plate chiller; to give me some pointers.



 
Reply With Quote
Old 11-15-2011, 12:11 AM   #3
H-ost
Recipes 
 
Jul 2011
Bellevue, WA
Posts: 1,746
Liked 72 Times on 53 Posts


I'm guessing you recirculate your wort, If so do you whirlpool back into your BK?

You could try a prechiller and/or throttling down the speed at which you are circulating into your chiller.

I don't use a chiller anymore and never used a plate chiller, maybe someone else will have some advice.

 
Reply With Quote
Old 11-15-2011, 03:50 PM   #4
Dale_3rd
Recipes 
 
May 2011
Cambridge, MD
Posts: 56

I do recirculate and angle the flow to create a whirlpool. I've also varied the output and watched the thermometer to set my best temp. drop speed.

I've got 2 ideas to try next brew. I'm going to make up a splitter to run tap water first to drop the temp down as quickly as possible first, then when it looks like the temp isn't falling quite as fast, switch over to a 12V RV pump, pumping ice water from an 18 gallon tub through the plate chiller back to the tub. Hopefully by January when the tap water temp is in the 40's I can eliminate the ice bath cooling part.

I've got off the end of the week so I'll be brewing up a red ale and giving this a try.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Splitting 5 gallon batch into 1 gallon batches 1stTimer Beginners Beer Brewing Forum 19 06-15-2011 12:16 AM
Shorted the 5 gallon batch by 1 gallon of water FotenSowda Beginners Beer Brewing Forum 12 04-02-2011 02:50 PM
brewing a 5 gallon batch in a 5 gallon fermentor NBABUCKS1 Beginners Beer Brewing Forum 4 05-28-2010 10:23 PM
5 gallon batch - ok to secondary in a 6 gallon carboy? Jakobrau Beginners Beer Brewing Forum 5 10-23-2008 01:23 AM
5 gallon batch + 5 gallon primary fermenter = good noisy123 Beginners Beer Brewing Forum 13 07-30-2008 11:45 AM


Forum Jump