Welding - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Welding

Reply
 
Thread Tools
Old 11-09-2011, 12:38 AM   #1
Tomtanner
Recipes 
 
Feb 2011
Tampa, Florida
Posts: 370
Liked 6 Times on 6 Posts



After much deliberation about how to get myself a brew stand (hiring a welder, buying a new one, buying slotted prefab peaces etc.). I have decided to just learn to weld myself and possibly spend less while acquiring a new skill.

I need some advice however...obviously. My goal is to number one purchase only what I need and nothing more at this time to save money. Then obviously learn to weld. I have no idea where to start accept that I see several options for pretty cheap on craigslist. I will be building something alongnthe lines of a Brutus first.... Dumbed down of course due to my limited knowledge. For the time I have no intentions of building anything larger. What is the most cost effective welder I should consider for such a project? I have not decided on what materials to use yet so flexibility is probably necessary.

Can you guys give me some input on what kind of welder will meet the requirements? Space and power supply rare nonissue.

Also before you guys lose your hair about safety precautions and all, I have a friend who will teach me how to weld and intend to take every single step towards safety that I can...... I am a natural worrier.

Thanks for all the help fellas a, I'm actually really excited to learn something new!

 
Reply With Quote
Old 11-09-2011, 12:49 AM   #2
hillhousesawdustco
HBT_LIFETIMESUPPORTER.png
 
hillhousesawdustco's Avatar
Recipes 
 
Jan 2011
up near babb, mt
Posts: 648
Liked 35 Times on 34 Posts


This thread help me when I had a similar question: http://www.homebrewtalk.com/f51/weld...estion-242846/

I have a cheapo 220v 120amp harbor freight mig/flux welder, it throws a bit of slag but does everything I ask it to. A lot of guys want you to spend a couple thousand dollars on a welder and associated equipment....for what you and I are doing, I really don't think all that is necessary. Whatever welder you chose, do yourself a big favor and get an auto-darkening helmet! Good luck, welding is a blast!

 
Reply With Quote
Old 11-09-2011, 01:41 AM   #3
Tomtanner
Recipes 
 
Feb 2011
Tampa, Florida
Posts: 370
Liked 6 Times on 6 Posts


Thanks for the tip! Can the welder referenced also weld stainless steel later on if needed?

 
Reply With Quote
Old 11-09-2011, 02:19 AM   #4
sonex
Recipes 
 
Jun 2011
dillsburg, pa
Posts: 391
Liked 12 Times on 12 Posts


you have to decide what type of welding you want to do. mig,stick,tig? each has its advantages and disadvantages.

 
Reply With Quote
Old 11-09-2011, 02:22 AM   #5
phoenixs4r
Recipes 
 
Jun 2011
Hayward, California
Posts: 1,515
Liked 56 Times on 51 Posts


110v buzz box. You're not building a bridge.

MIG is the easiest to pick up, and it'll do what's needed for a steel stand. Possibly aluminum too depending on how thick you want it.

 
Reply With Quote
Old 11-09-2011, 02:31 AM   #6
autobaun70
HBT_SUPPORTER.png
 
autobaun70's Avatar
Recipes 
 
Dec 2010
Spartanburg, SC
Posts: 671
Liked 96 Times on 65 Posts


just get a basic 110V mig that is set up for flux core. Miller & Lincoln both make a decent one. They call them the "great electric caulk gun" for good reason.

Couple of really basic tips:

1) clip the ball off of the end of the wire with a pair of snips between welds. Makes it much easier to start your next weld.

2) never under-estimate the connection of your ground clamp to your work piece. Clean the metal good, and try to keep the ground close to your point of work.

 
Reply With Quote
Old 11-09-2011, 11:51 AM   #7
Eternalodyssey
Recipes 
 
Jul 2009
St Louis, MO
Posts: 63
Liked 2 Times on 1 Posts


+1 on the cheap Harbor Freight Flux Core welder. Some of the true Iron workers will turn their nose up to that welder but its been great for me, an amateur. $99 at Harbor freight. Like was said, get an auto-darkening hood, it will make you happy to not hold that stupid shield. Get some decent welding gloves from a farm supply store on the cheap as well. An angle grinder is indespensible for cleaning off the welds. If you can afford it, a rot-zip is another cool little tool you will get endless use of and the wire brides make everything look pretty as well as easily cleaning off the slag &I any surface material prior to paint. All said & done I think I paid a total of $300 or maybe a little more for all the toolsand no w I have them &I can learn to use them better on new projects! A man can never have too many tools. One note, throw the wire that comes with the flux corr AWAY. Its cheap shoddy material &I it sucks. Pick yourself up some Lincoln.35 wire. For the win! !!

 
Reply With Quote
Old 11-09-2011, 01:47 PM   #8
dfess1
Recipes 
 
Mar 2011
Flourtown, PA
Posts: 1,414
Liked 99 Times on 72 Posts


Keep in mind all the other consumables you'll need as well. Angle grinder, grinding wheels, flap wheels, Helmet, Gloves, Chop Saw, Chop Saw blades, zip discs, C-clamps, etc. All of this will add up too.

 
Reply With Quote
Old 11-09-2011, 01:49 PM   #9
MaxOut
Recipes 
 
Jan 2011
Hughesville, Maryland
Posts: 754
Liked 82 Times on 54 Posts


Good info here-

http://www.homebrewtalk.com/f51/weld...-build-164749/

 
Reply With Quote
Old 11-09-2011, 02:09 PM   #10
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,200
Liked 1657 Times on 1071 Posts


I got the harbor freight mig flux core with the optional gas connection. I tried flux core for a bit but man is it splattery/smoky. I hooked up my extra CO2 tank and put some solid core in the machine and it was a lot more enjoyable to work with.

Don't skimp on safety gear. I got the cheap HF welding gloves and the seam at the thumb opened up just big enough for a sparkler to jump in and burn me good right on the thumb web.

I would NEVER discourage someone from buying a MIG and learning how to stick metal together whether it's slightly less cost effective than hiring out or not.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote


Reply
Thread Tools



Forum Jump