regulator - what do i have here - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > regulator - what do i have here

Reply
 
Thread Tools
Old 11-04-2011, 02:32 AM   #1
straycat
 
straycat's Avatar
Recipes 
 
Jun 2010
charlotte
Posts: 202
Liked 2 Times on 2 Posts



this came attached to a craigslist purchase. is it worth anything or time to recycle? that outside port has what looks and feels like torn metal.

any feedback is appreciated.







__________________
status = brewing

 
Reply With Quote
Old 11-04-2011, 02:43 AM   #2
Golddiggie
HBT_SUPPORTER.png
 
Golddiggie's Avatar
Recipes 
 
Dec 2010
Posts: 11,995
Liked 496 Times on 431 Posts


IF you can get the remains from the high pressure gauge out of the body, you could rebuild it (add a replacement gauge to it, test it, maybe get a rebuild kit too) and then use it. If you can't get the rest of the gauge out of the body, see if there's any shops in your area that will recondition/repair it at a decent rate. Just keep in mind how much a new regulator would cost (to your door) and don't get too close to that total price.

Was the CO2 tank included with the regulator, or is that one you already had?
__________________
Hopping Tango Brewery

跟猴子比丟屎 ・ Gun HOE-tze bee DIO-se

On Tap: Caramel Ale, Mocha Porter II, MO SMaSH IPA
Waiting/Carbonating: 12.5% Wee Honey II, 8.9% Old Ale, English Brown Ale, Lickah ESB, Mocha Porter II
Fermenting
K1:
K2: Epic mead
K3: TripSix
On Deck: Caramel Ale
Aging:mead
Mead [bottled]:Oaked Wildflower Traditional, Mocha Madness, Blackberry Melomel, maple wine

 
Reply With Quote
Old 11-04-2011, 02:49 AM   #3
straycat
 
straycat's Avatar
Recipes 
 
Jun 2010
charlotte
Posts: 202
Liked 2 Times on 2 Posts


thanks for the quick reply. i bought the 5 lb tank for $10 (nice price) after another local home brewer tipped me off to extra equipment that he didn't pick up. the regulator was attached. i'll look into getting the remaining gauge out but i'm guessing the cost for a new one will be a better bet than the money spent on reconditioning this one. thanks again for the input.
__________________
status = brewing

 
Reply With Quote
Old 11-04-2011, 02:54 AM   #4
Golddiggie
HBT_SUPPORTER.png
 
Golddiggie's Avatar
Recipes 
 
Dec 2010
Posts: 11,995
Liked 496 Times on 431 Posts


Looks like an aluminum tank. For $10, that's really good provided it has a good hydro stamp on it (under 5 years old). Otherwise, figure another $20-$30 to get it recertified so you can get it filled. Still less than you usually find good used ones for, or new ones.

Check with the better vendors, as well as your local HBS, for good rates on a new/replacement regulator. As I mentioned, if you can get the remains out, it could be worth it to rebuild it. If you don't have the tools to tackle that, then probably better off selling it to someone that can and get a [tested] good one.
__________________
Hopping Tango Brewery

跟猴子比丟屎 ・ Gun HOE-tze bee DIO-se

On Tap: Caramel Ale, Mocha Porter II, MO SMaSH IPA
Waiting/Carbonating: 12.5% Wee Honey II, 8.9% Old Ale, English Brown Ale, Lickah ESB, Mocha Porter II
Fermenting
K1:
K2: Epic mead
K3: TripSix
On Deck: Caramel Ale
Aging:mead
Mead [bottled]:Oaked Wildflower Traditional, Mocha Madness, Blackberry Melomel, maple wine

 
Reply With Quote
Old 11-05-2011, 12:01 AM   #5
babbott
Recipes 
 
May 2008
greenbelt
Posts: 60

Thats not a high pressure guage that is missing.
, it is the broken valve on the supply side to the keg. Its an old taprite regulator, use an easy out to get the old valve out, replace and start keggin.

 
Reply With Quote
Old 11-05-2011, 12:30 AM   #6
babbott
Recipes 
 
May 2008
greenbelt
Posts: 60

Forget what i said, mine is the same model and the gas out port is on the bottom. There is a threaded plug on mine where yours is broken. Maybe put a plug there?

 
Reply With Quote
Old 11-05-2011, 04:24 AM   #7
ThreeDogsNE
Good for what ales you
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jul 2008
, Southwest Iowa
Posts: 648
Liked 36 Times on 28 Posts


Here is a link to the gauge you need: http://stores.kegconnection.com/Cate...nd+Accessories

Show up for me as the sixth item down.

These folks have been great to deal with, by the way. And no, I have no connection to them other than as a well satisfied customer.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Single regulator into dual regulator? h22lude Bottling/Kegging 13 09-01-2011 05:38 PM
Make a dual regulator into a single regulator set up fishnfever Bottling/Kegging 4 05-03-2011 11:23 PM
Soda Regulator vs. Beer Regulator shildebr Bottling/Kegging 1 03-27-2011 02:26 AM
2 keg setup - dual body regulator vs. regulator with dual output manifold heyjaffy Bottling/Kegging 11 02-18-2011 10:17 PM
is co2 regulator the same as a beergas regulator? bkov Bottling/Kegging 4 04-15-2009 03:32 AM


Forum Jump