New System Advice/Suggestions Wanted - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > New System Advice/Suggestions Wanted

Reply
 
Thread Tools
Old 10-27-2011, 09:20 PM   #1
cobolstinks
Recipes 
 
Sep 2008
Rochester, MN
Posts: 229
Liked 2 Times on 2 Posts



Hello,

Looking at building a new Wallace style weldless sculpture. I have 3 kegs and are about to buy couplings and handoff to a welder to intall them. This is what i was thinking of going with for plumbing in each of the vessals.

MashTun:
thermometer
ball valve -->falsebottom

HLT:
thermometer
ball valve
sightglass

Kettle:
thermometer
ball valve
sightglass
whirlpool recirculation point (ball valve outside with QD, inside copper tubing flush to kettle wall)

What are people's experience / thoughts on this? I was debating things like do i need/want a sight glass on my mash tun? or do i want a recirculation point on my HLT so i could dual purpose it as a kettle, etc...

What do people recommend for sanke false bottoms?

Was going to get 3 of these: http://www.midwestsupplies.com/cast-...rner-only.html with a 30 psi reg and hook that to a lead pipe.

Thoughts?

 
Reply With Quote
Old 10-27-2011, 10:08 PM   #2
Chad_C
Recipes 
 
Apr 2009
Middletown, Maryland
Posts: 203
Liked 15 Times on 6 Posts


Check out agrisupply.com for your burners.
__________________
Beer makes you feel the way you ought to feel without beer!

 
Reply With Quote
Old 10-28-2011, 01:41 PM   #3
cobolstinks
Recipes 
 
Sep 2008
Rochester, MN
Posts: 229
Liked 2 Times on 2 Posts


thanks for the agrisupply.com tip, gonna save me $10 per burner

 
Reply With Quote
Old 10-28-2011, 02:00 PM   #4
TomRep
Recipes 
 
Sep 2009
Fleetwood, PA
Posts: 1,002
Liked 11 Times on 10 Posts


I would add a sight glass to the mash tun as well. You'll be able to heat your strike water right in the tun before adding the grains.
tom
__________________
Abandoned Logic Brewing

 
Reply With Quote
Old 10-28-2011, 02:01 PM   #5
Chad_C
Recipes 
 
Apr 2009
Middletown, Maryland
Posts: 203
Liked 15 Times on 6 Posts


No problem! I am about ready to build a stand myself. Things add up quickly, so saving any amount of money is helpful!

 
Reply With Quote
Old 10-28-2011, 02:24 PM   #6
audger
Recipes 
 
Apr 2011
., Connecticut
Posts: 1,497
Liked 43 Times on 42 Posts


you can skip the thermometer in the boil kettle if you want to save a few bucks. boiling water will always be 212 degrees.

you dont really need a sight glass in the mash tun either, as you will know how much water is going into it to begin with, and the grains will not give you an accurate reading. the level will only tell you how much combined water+grains there are, in gallons- which isnt that useful to know. and you will be constantly cleaning grains out of it which is annoying.

put a temp probe in the HLT and mash tun, and a sight glass on the HLT and boil kettle.

 
Reply With Quote
Old 10-28-2011, 02:36 PM   #7
TomRep
Recipes 
 
Sep 2009
Fleetwood, PA
Posts: 1,002
Liked 11 Times on 10 Posts


If your heating your strike water in your mash tun, you won't have the grains in there during heating. Makes measuring your strike water a lot easier, atleast it did for me.
Tom
__________________
Abandoned Logic Brewing

 
Reply With Quote
Old 10-28-2011, 02:41 PM   #8
cobolstinks
Recipes 
 
Sep 2008
Rochester, MN
Posts: 229
Liked 2 Times on 2 Posts


The reason i was thinking of skipping out on the sightglass on the mash tun was because I was thinking of measuring the strike water in the HLT and pumping it to the mash to heat in the mash.

Does this make sense? or do most avoid the extra transfer?

 
Reply With Quote
Old 10-28-2011, 02:42 PM   #9
cobolstinks
Recipes 
 
Sep 2008
Rochester, MN
Posts: 229
Liked 2 Times on 2 Posts


The reason i was thinking to have a therm in the kettle was because I was planning on recirculating the wort through my CFC. This way I could measure the temp in the kettle and see when Im at pitching temps.

 
Reply With Quote
Old 10-28-2011, 03:03 PM   #10
TomRep
Recipes 
 
Sep 2009
Fleetwood, PA
Posts: 1,002
Liked 11 Times on 10 Posts


I would avoid the extra transfer. You'll lose temp during the transfer so unless you were going to overheat the strike, I wouldn't mess with it. If you were looking at going with three burners anyway, just heat it right in the mash tun.
Tom

Sent from my DROIDX using Home Brew Talk
__________________
Abandoned Logic Brewing

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
AG system in an APT/Condo advice SDCore Kegerators & Keezers 8 07-15-2011 07:08 AM
Intermittent gas parts advice for Brutus style system? worldzfree Brew Stands 10 05-25-2011 07:39 PM
Will a HERMS system work on 1-2 BBL system Ranger9913 Brew Stands 4 01-27-2011 09:08 PM
Just wanted to say... rerobb DIY Projects 4 01-14-2011 04:15 PM
Need Suggestions for a new 55 gallon system Brewmoor Brew Stands 81 12-29-2010 04:25 PM


Forum Jump