Muffler Clamp Size - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Muffler Clamp Size

Thread Tools
Old 10-27-2011, 03:33 PM   #1
Aug 2008
Rockford, IL
Posts: 287

I just finished putting together my shiny, SS 1.5" RIMS tube and I'm not sure if I should pick up 1.5" muffler clamps or 1.75" in order to mount it to my stand. Thanks!

Reply With Quote
Old 10-27-2011, 05:10 PM   #2
Apr 2011
., Connecticut
Posts: 1,497
Liked 44 Times on 42 Posts

you will probably need even larger clamps than 1.75" depending on what you are clamping it to and how. no way for us to know, though.

Reply With Quote
Old 10-27-2011, 09:22 PM   #3
Jan 2010
Posts: 745
Liked 106 Times on 73 Posts

I have a 2" clamp here that measures 2.17", meaning that it will fit perfectly around something with an OD of 2.17". Putting it around something that's 2" is a sloppy fit. So, you may need a clamp that's sized slightly smaller than the OD of your tube. Your best bet is probably to just bring your RIMS tube to the store and try a few different ones.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Kettle size versus heater element size Hound Electric Brewing 6 03-21-2013 11:29 PM
Tig welded Tri Clamp electric 1 NPS Swagman Electric Brewing 5 01-18-2012 02:14 AM
RIMS Tube Size antiteam Electric Brewing 7 10-04-2011 02:39 PM
Wire Size? McCuckerson Electric Brewing 11 08-08-2011 03:14 PM
Question about stepping down wire size for PID HossTheGreat Electric Brewing 11 02-04-2011 05:15 PM

Forum Jump