Decoction and Mash Out questions - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Decoction and Mash Out questions

Reply
 
Thread Tools
Old 10-20-2011, 05:35 PM   #1
Mk010101
 
Mk010101's Avatar
Recipes 
 
Oct 2006
New Mexico
Posts: 259
Liked 2 Times on 1 Posts



I am planning on doing a vienna style lager this year (now that I have something to control lager temps for fermentation and laggering.) I wanted to start simple and figure vienna style is that.

First is it even necessary to do a decoction with vienna grains? If one didn't do a decoction and wanted a medium body beer, do they just do the single infusion at 154 degrees for an hour or something else? I am tempted to try a single decoction just for kicks, but I wanted to see if it was necessary.

Second (and this pertains to ALL brewing, not just lagers, etc) -- when mashing out, I always tried putting in boiling water into the mash tun but never was able to get enough in to raise the temps to mash out. I always came up 5-10 degrees short because I didn't have enough room in the mash tun. After watching Kaiser's decoction video, I saw he removed some of the mash, brought to a boil and then added back to get mash out temps. Would this work for ANY brew (and not just those scheduled for decoction?)
__________________
Output 2012: 56 gallons
Goal 2012: 120 gallons

 
Reply With Quote
Old 10-20-2011, 06:41 PM   #2
asterix404
Recipes 
 
Mar 2009
Natick, MA
Posts: 568
Liked 12 Times on 12 Posts


Decoction is fairly simple to learn but it takes a while to get use to it.

Quote:
First is it even necessary to do a decoction with vienna grains? If one didn't do a decoction and wanted a medium body beer, do they just do the single infusion at 154 degrees for an hour or something else? I am tempted to try a single decoction just for kicks, but I wanted to see if it was necessary.
Yes, you can get a medium bodied beer if you do a single infusion and you can also add meladonin malt which will give the effect of a decoction. I have never done this because I find that a decoction is not terribly hard and the efficiency gains are huge.

Mashing out is a tricky situation. Basically, I drain my tun before mashing out and then immediately batch sparge to 168-172 and bring the mash up to a boil very quickly. I want to denature all of the enzymes, this is how I do it. I think it's much easier to mash out if you have the ability to head your MLT (think keggie) but when dealing with a cooler I would not bother to mash out. You can however decoct to a mash out temp if you really wanted to but the big gains come from jumping from 122 to 148, and 148 to 162. I don't want to deal with a 3rd decoction to get from 162 to 168, I just drain and heat. Hope this helps.

 
Reply With Quote
Old 10-20-2011, 06:45 PM   #3
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,254
Liked 7741 Times on 5431 Posts


I did Bradsul's Vienna lager recipe- it was a double decoction I believe. It's easy, and the beer was rich and malty. It's not necessary, so if you want to skip the decoction you could add .5 pound of melanoidin malt and call it good.

For mashing out, if you're fly sparging, you can just add boiling water to get your grainbed temp to 168 or so. But if you're a bit low, that's ok. You can sparge with hotter water if you need to, but it's not a big deal.

If you're batch sparging, there is no advantage to mashing out.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 10-20-2011, 07:37 PM   #4
Denny
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jun 2005
Eugene, OR
Posts: 4,703
Liked 624 Times on 447 Posts


Adding melanoidion malt to "mimic" a decoction assumes that a decoction does something to flavor. I'm not so certain.
__________________
Life begins at 60....1.060, that is!

www.dennybrew.com

http://www.experimentalbrew.com - "Homebrew All Stars" now shipping!

 
Reply With Quote
Old 10-20-2011, 08:51 PM   #5
jpc
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jan 2009
Santa Clara, CA
Posts: 1,918
Liked 68 Times on 51 Posts


Quote:
Originally Posted by asterix404 View Post
Decoction is fairly simple to learn but it takes a while to get use to it.



Yes, you can get a medium bodied beer if you do a single infusion and you can also add meladonin malt which will give the effect of a decoction. I have never done this because I find that a decoction is not terribly hard and the efficiency gains are huge.

Mashing out is a tricky situation. Basically, I drain my tun before mashing out and then immediately batch sparge to 168-172 and bring the mash up to a boil very quickly. I want to denature all of the enzymes, this is how I do it. I think it's much easier to mash out if you have the ability to head your MLT (think keggie) but when dealing with a cooler I would not bother to mash out. You can however decoct to a mash out temp if you really wanted to but the big gains come from jumping from 122 to 148, and 148 to 162. I don't want to deal with a 3rd decoction to get from 162 to 168, I just drain and heat. Hope this helps.
I don't understand how your process works. The first runnings will contain the enzymes, and they will remain active once you've drawn off the liquid. They will continue to work on the first runnings while you are sparging.

Or am I missing something?

 
Reply With Quote
Old 10-20-2011, 11:23 PM   #6

Love the decoction mash. As a rule of thumb I decoct my lagers at least once.
__________________
2012 Canadian Brewer of the Year
2013 Canadian Brewer of the Year
2015 Canadian Brewer of the Year

@evilgoatbrewing

 
Reply With Quote
Old 10-21-2011, 12:40 AM   #7
VladOfTrub
Recipes 
 
Oct 2011
, Pa
Posts: 717
Liked 169 Times on 114 Posts


To remain true to style you may want to try decoction mashing. You can do a double decoction, skipping the acid rest if you use 5.2 Ph stabilizer in the water. A pound of grain takes less BTUs to reach boiling than a pound of water, and a pound of boiled mash raises the temperature in the tun better than a pound of water. That may sound weird but it does. What makes a decoction unique, is that the entire mash is taken through all the temperature ranges two or three times. It breaks down more haze forming proteins. It also allows the enzymes to get at the starch easier. Once you try decoction mashing, you'll notice that the water in the decoction mash has a smooth silky feel to it. You'll also notice the difference in the way the spent mash looks as compared to an infusion. I have been doing triple decoction mashing since the early 80's. To me, the extra time mashing and boiling doesn't matter. All my equipment is designed for the decoction procedure and that makes it go a lot better.

 
Reply With Quote
Old 10-21-2011, 02:22 PM   #8
Mk010101
 
Mk010101's Avatar
Recipes 
 
Oct 2006
New Mexico
Posts: 259
Liked 2 Times on 1 Posts


thanks for all the replies. I think I will definitely give decoction a try. It does sound very interesting and for me a new twist to brewing. I've probably done 40-50 batches in the last 5 yrs and I need to try something new.
__________________
Output 2012: 56 gallons
Goal 2012: 120 gallons

 
Reply With Quote
Old 10-21-2011, 03:27 PM   #9
Sithdad
Recipes 
 
Jul 2009
Macungie, PA
Posts: 332
Liked 12 Times on 10 Posts


I did my first decoction on a 1 gallon batch of a dark mild, just to try it out. It was really very easy. Just make sure to pull enough mash to raise your temp in the tun. Taking more than you need is better than not enough. There's a good video by Brewingtv that demonstrates the decoction process. Less detailed as Kai's but good none-the-less.
I plan on doing more decoctions in the future. My mild is currently carbing up.

 
Reply With Quote
Old 10-21-2011, 03:44 PM   #10
asterix404
Recipes 
 
Mar 2009
Natick, MA
Posts: 568
Liked 12 Times on 12 Posts


Quote:
I don't understand how your process works. The first runnings will contain the enzymes, and they will remain active once you've drawn off the liquid. They will continue to work on the first runnings while you are sparging.

Or am I missing something?
Most anything that will have been able to convert have already converted. The first running I heat up to about 168 in the kettle while the batch sparge is sitting. Even if I didn't heat it up, if there is any conversion happening it is happening for a very short while (say like 20min). Honestly, I think there are more important things to worry about and the big worry about doing a mashout is for fly sparging where it can take a long time to rinse the grain.

At the very least, I haven't had any huge problems or bad beer and I haven't noticed a difference in my system when I have done a mashout via decoction vs. just collecting the wort and bringing it up to a boil while the batch sparge is doing its thing. If you think I should look at this again, I can test it out with a small batch but I think if you do a decoction mash schedule you are basically mashing for about 2h so an extra 10min for it to drain won't really hurt it I think.

The trick for the first time is to basically get the process down, it's a complex process which takes a while to get right but my strong advice is to always take out more than you think you will need since you can always add cold water. It's much harder to heat up you mash unless you have a direct fire.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
First decoction mash tkone All Grain & Partial Mash Brewing 9 03-16-2011 12:30 PM
Do I need to do a decoction mash ? Bru All Grain & Partial Mash Brewing 10 03-03-2011 01:31 PM
decoction mash or not? lpdb185 All Grain & Partial Mash Brewing 1 02-14-2010 02:43 PM
My first Decoction Mash!!! devaspawn All Grain & Partial Mash Brewing 9 12-28-2008 06:02 AM
What's a decoction mash? Maharg All Grain & Partial Mash Brewing 3 09-29-2007 02:38 PM


Forum Jump