Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Other > Help me open this keg!! "a" system euro
Reply
 
Thread Tools
Old 10-17-2011, 05:21 AM   #1
arin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Tucson, AZ
Posts: 18
Default Help me open this keg!! "a" system euro

I have been trying for days to remove the stem and seal on this damn thing. It is kind of like a "S" system but has a wide flat lip on the top. I have the thing unscrewed but can't find the safety catch to save my life.

Anyone ever dealt with one of these?


arin is offline
 
Reply With Quote
Old 10-17-2011, 05:49 AM   #2
TXCrash
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
TXCrash's Avatar
Recipes 
 
Join Date: Sep 2005
Location: DFW
Posts: 19,825
Liked 2870 Times on 2807 Posts
Likes Given: 117

Default

I have 2. I don't remember which link I used...

You'll get it. First keg took a half hour... second took 2 minutes.

http://www.beer-recipe.org/EuroSanke.html

http://homedistiller.org/forum/viewt...p?f=15&t=21061


__________________
Crash is one hard-headed mofo.-Shecky
The one that road tests motorcycle safety gear.-Ace_Club
Oregon boys are genetically predisposed to annoy people for extended periods of time.-thataintchicken
Are you just bored and wanted something, anything to type?-IrregularPulse

I will just push my son to have kids at 15. Then I will see the grandkids longer.-AMonkey
IP's wife's boobs weigh more than my wife.-Randar
My wife has the coordination of a drunk two legged spider.-Zuljin
TXCrash is online now
 
Reply With Quote
Old 10-17-2011, 11:42 AM   #3
tasteebrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Chattanooga, TN
Posts: 22
Liked 1 Times on 1 Posts

Default

Hi I just removed one just like it, it takes a medium flat head(maybe 3/8" wide) and a hammer. I removed the ball valve by prying out the rubber seal. then used a flash light to find the catch. Then used the screw driver and hammer pop it. I referred to this link.

http://www.homebrewtalk.com/f35/how-...al-ring-76393/

it's a pain but doable! good luck!! oh ignore the part about a special tool...
tasteebrewer is offline
 
Reply With Quote
Old 10-19-2011, 02:46 AM   #4
arin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Tucson, AZ
Posts: 18
Default

Holy Crap! the one that I have does not have a catch. I was looking for something that didn't exist. The problem with mine was the bottom of the large diameter piece that hold the dip tube had a bent flange that was catching the lip of the keg by probably 1/32". I got all ready to rip it out with a mother of a prybar and it pretty much slipped out with slight aggressive force (I think it got intimidated when it saw me with the prybar and gave up ;-) )
arin is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
"Custom" faucet shank removal tool... 1" wrench and dremel is all you need. RoaringBrewer Kegerators and Keezers 36 11-20-2014 10:18 PM
"square" "Conical" Fermenter BasementGrowler Fermenters 6 12-16-2010 03:10 PM
How do I reliably attach 1/4" ID hose to smooth 1/4" OD Stainless Tubing? kenc_zymurgy Kettles, Mash Tuns, & Hot Liquor Tanks 8 10-04-2010 08:02 PM
Tiny Brew (TB) - "Research Brewing System" bodhi314 Brew Stands 26 05-01-2010 03:54 AM
"Poor Mans" Electric System jim4065 Brew Stands 1 02-04-2010 11:15 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS