Auber Ins 2362 help - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Auber Ins 2362 help

Thread Tools
Old 10-13-2011, 12:53 AM   #1
Brew Meister
wadefisher's Avatar
Jul 2009
Lewistown / Dade City, PA / FL
Posts: 278
Liked 10 Times on 8 Posts

The J2 Alarm which is set for Low Temperature warning has a real quiet but noticeable continuous pulsing buzz and the LED lights up just a little. Like some kind of bleed-over. When it is triggered by the Alarm settings it works as it is suppose to. Everything works as it is suppose to except this low buzzing noise. I traded the buzzer out with another, same issue. Double check all grounds.
outY setting is set to 2. J1 alarm, J2 alarm, SSR PID controlled
also set outY to 3 which makes SSR on/off

Any Ideas?

I sent mail to Auber Instruments also.
Click image for larger version

Name:	Incubator Wiring Diagram 120v alarms.jpg
Views:	905
Size:	27.6 KB
ID:	35823  

www DrunkMonkeyBrewWerks dot com

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Auber 2362 wiring SpaceCoastBrew Electric Brewing 5 05-29-2014 04:33 AM
Auber 2362 PID malfunctioning - tips? Psych Electric Brewing 4 06-17-2011 07:55 PM
Auber 2362 dboblitt Electric Brewing 2 03-15-2011 03:09 AM
auber 2362 wire diagram shutupjojo Electric Brewing 5 02-14-2011 03:48 AM
Auber 2352 vs. 2362 paledragon Electric Brewing 0 12-19-2010 02:24 PM

Forum Jump