Secondary and Carboy Question - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Extract Brewing > Secondary and Carboy Question

Reply
 
Thread Tools
Old 04-13-2007, 07:55 PM   #1
zonabb
Recipes 
 
Mar 2007
Posts: 90


OK, I want to get a glass carboy for my primary. I found the plastic bucket I have to be no fun!!! Can't see anything. I'm brewing 5-galon batches so what size should it be? 5, 6, 6.5 gallon?

I assume then that I can still use the plastic bucket as a secondary?

 
Reply With Quote
Old 04-13-2007, 08:25 PM   #2
DeathBrewer
Maniacally Malty
HBT_LIFETIMESUPPORTER.png
 
DeathBrewer's Avatar
Recipes 
 
Apr 2007
Oakland, CA
Posts: 21,790
Liked 263 Times on 134 Posts


6.5 gallon for primary. might as well get a 5 gallon for the secondary, too. i dont use plastic, personally

 
Reply With Quote
Old 04-13-2007, 08:31 PM   #3
BigBam
Recipes 
 
Jan 2007
Posts: 18

6 or 6.5 gallon for primary will be fine. if you go with 6 gallon, will probably want to use a blow-off tube. 6.5 gallon carboy probably doesn't need it. personally, i use the blow-off tube with all primary ferms. don't use the plastic bucket for secondary. you may run into some oxidation isues.

 
Reply With Quote
Old 04-13-2007, 08:33 PM   #4
BierMuncher
...My Junk is Ugly...
HBT_MODERATOR.png
 
BierMuncher's Avatar
Recipes 
 
Jan 2007
St. Louis, MO
Posts: 12,410
Liked 789 Times on 435 Posts


6.5 Glass for primary. 5 gallon plast for secondary. Use the bucket for transporting and aerating your beer.

You really will like having clear containers for prim and sec so you can see the beer. Having the bucket as a secondary won't let you see the effect of secondary conditioning over time.

 
Reply With Quote
Old 04-13-2007, 08:50 PM   #5
zonabb
Recipes 
 
Mar 2007
Posts: 90

Thanks. I'll be hitting the LHBS tomorrow in the a.m.

BierMuncher, are you saying a plastic carboy for the secondary?

 
Reply With Quote
Old 04-13-2007, 11:40 PM   #6
JacktheKnife
Recipes 
 
Apr 2005
Texas
Posts: 344
Liked 1 Times on 1 Posts


Zoneabb,

Hey man,
use glass.
I mean really.

I use three 7.5 gallon primarys
and three 5 gallon secondarys
They will last forever and are easier to clean than plastic.
They will brew better xxxx.


Get a 5 gallon secondary
and as big of a primary as they have.
Glass, Glass, Glass.
A big brush to clean them out and luck.


J. Knife

 
Reply With Quote
Old 04-14-2007, 03:15 PM   #7
Moonpile
 
Moonpile's Avatar
Recipes 
 
Apr 2007
Pasadena, MD
Posts: 668

I have a 6.5 for primary, though we just put our second batch into a plastic primary because we still had another batch in the 6.5.

That said we just got six 5 gal carboys for $15 ea off craigslist! They're all a bit different though, as they're old water bottles. The necks are a bit narrower than the 5 gal I already had that I'd purchased at my old LHBS when I lived in Albuquerque. Probably about four of them will be used as secondaries for ale, but as I understand it these will make good primaries for mead and cider, and we're looking forward to doing some of those too.

We eventually want another 6.5 so we can do two batches at a time in primary.

Don't forget a blowoff hose for your new carboy, and enjoy!

 
Reply With Quote
Old 04-16-2007, 12:38 AM   #8
zonabb
Recipes 
 
Mar 2007
Posts: 90

Never made it to the store this weekend. Home project kept me away from brewing. Your input was helpful and I'm gonna get the glass this week.

Thanks

 
Reply With Quote
Old 04-16-2007, 07:20 PM   #9
CBBaron
 
CBBaron's Avatar
Recipes 
 
Feb 2007
Cleveland
Posts: 2,786
Liked 11 Times on 8 Posts


There is a plastic carboy called Better Bottle. They look very similar to glass carboys but are much lighter and wont shatter if you drop them. They claim to be made of a special plastic that blocks O2 preventing oxidation. I like the one I have so far. It is much easier to handle when empty and I don't have to worry as much about setting it on hard floors. However it doesn't come in 6.5gal sizes so a blowoff will probably be necessary.
Craig

 
Reply With Quote
Old 04-16-2007, 07:26 PM   #10
DeathBrewer
Maniacally Malty
HBT_LIFETIMESUPPORTER.png
 
DeathBrewer's Avatar
Recipes 
 
Apr 2007
Oakland, CA
Posts: 21,790
Liked 263 Times on 134 Posts


never tried those, but i think glass is still the way to go. get a handle if you're afraid of dropping it (i've shattered one). The handles make it easier to carry and make cleaning (swirling) a breeze.

http://morebeer.com/product.html?product_id=16660
__________________
Easy Partial Mash Brewing - Stovetop All-Grain Brewing

"Death is always with us." - Brewpastor

Quote:
DIAICYLF
We will remember...

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Secondary fermentation: re-using my carboy, oxidation fears, timing question dulles Fermentation & Yeast 2 10-15-2009 12:10 AM
secondary carboy marshman General Techniques 11 07-31-2008 07:29 PM
secondary with only one carboy Yosemite Bing General Techniques 15 07-12-2008 05:58 PM
5g Batch In Primary 6g glass carboy secondary-Question jednet Cider Forum 6 01-30-2008 08:37 AM
Secondary Carboy Fermentation Vs. Secondary Bottling Fermintation. MntFresh General Techniques 9 05-17-2007 06:58 PM


Forum Jump