Got a dimpling tool lying around? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Got a dimpling tool lying around?

Reply
 
Thread Tools
Old 10-05-2011, 12:57 PM   #1
jwb96
Recipes 
 
Apr 2008
Brusnwick, ME
Posts: 56
Liked 1 Times on 1 Posts



This may belong in the classified section, but figured more people who might have one would see it here.

I have some kegs I want to put fittings into on my way to an electric set-up. With so many people having gone down the dimple & solder route, I'm hoping someone has their now-idle dimple tool just lying around and would like to pass it along so it can get some more use.

It would be really cool if we could turn it into the brotherhood of the traveling dimpler - pass them on from one DIYer to another, each person just paying shipping charges.

Just a thought . . .

Jim

 
Reply With Quote
Old 10-05-2011, 01:19 PM   #2
DarkBrood
Recipes 
 
Aug 2010
Manchester, NH
Posts: 362
Liked 14 Times on 13 Posts


They're cheap to make...a handful of spare parts basically. Check a few of the threads that have photos and stop by your local scrapyard. You may even have a local plumber or electrician that will just let you borrow the couple of pieces you need to do the job.
__________________
*** Brian Gibson ***
Recognized BJCP Beer Judge / Certified Beer Server (Cicerone Level I)
BREWER: Milly's Tavern & Stark Brewing Company
WRITER: http://BrewsAndStews.wordpress.com TWITTER @DarkBroodBrews
PHOTOGRAPHER: http://Brian-Gibson.FineArtAmerica.com

 
Reply With Quote
Old 10-05-2011, 03:47 PM   #3
jwb96
Recipes 
 
Apr 2008
Brusnwick, ME
Posts: 56
Liked 1 Times on 1 Posts


Quote:
Originally Posted by DarkBrood View Post
They're cheap to make...a handful of spare parts basically. Check a few of the threads that have photos and stop by your local scrapyard. You may even have a local plumber or electrician that will just let you borrow the couple of pieces you need to do the job.
Good point - I hadn't even looked at the cost.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone want to rent or sell an 1-1/4in and 13/16 round punch tool? NTabb Electric Brewing 6 01-27-2011 10:54 PM


Forum Jump