I'm looking to sell a new 50 plate chiller with inline oxygenation setup. At this point, it has only had water run through it, never wort.
Here's the exact model of the plate chiller:
It has camlock fittings on the wort side, but standard 1/2 barb fittings on the water side. This can be easily changed.
Inline oxygenation was built with the following parts:
1 H612 Stainless Nipple - 1/2 in x 1.5 in Threaded
2 H621 Stainless Tee - 1/2 in FPT on all sides
It is only missing a NPT thermometer on the output side (http://morebeer.com/view_product/186...e_x_2%22_Probe
). Once you have that, you'll be good to go. If you don't care about the thermometer, you can simply plug the hole with a MPT fitting.
Please PM me if interested. I can send pictures if you'd like, but since everything is new, there's not much to see. Since it has never been used, I'm looking to get around $130. This is essentially throwing in the oxygenation portion of the setup for free (~$60).